1 / 3
QRP Labs QMX+ enclosure with Powerpole connector — image 1
1 / 3

QRP Labs QMX+ enclosure with Powerpole connector

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a remix of the excellent QMX+ enclosure from 3DSistem with a modified back panel for Powerpole connectors

Rating
0 / 5
Likes
5
Downloads
33
Makes
0
Views
315
Reviews
0

Updated at source:

Model information

Category
Other Ideas
License
Creative Commons — Attribution — Noncommercial — Share Alike

Original description:

"Simplified/free version  of my case for QRPLabs QMX+

Case has slightly biger tolerances but precise soldering of front and back components is still needed. You can always drill the holes a bit if you mised position on some of them.

XY size compensation is included within the design so there is no need to apply it in slicer.

To assemble it push the pcb in slot on the bottom part from back, then put front/back panels. 2.5-3mm screws needed for assembly.

Original buttons and knobs from kit fit this case."

Tags