Wormhole light inside the Martin's 80cm Stargate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix to integrate LED lights inside the stargate.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 174
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted to integrate LEDs directly inside the Stargate to simulate the wormhole.
So I cut the lower rim into several sections to print a piece with transparent filament for the lighting.
Please use this model for the electronics.
I printed the middle part with Overture Clear PETG using this settings.
For the front and back parts, I recommended to print it with a 0.2 nozzle for better detail.
How many to print:
8 Lower Rim Middle
12 Lower Rim Front
11 Lower Rim Back
1 Lower Rim Back For Led Wire Left or 1 Lower Rim Back For Led Wire Middle
240 Emitters (the v2 is must easier to insert but not tested in long-term if it stays in place without glue)