Air Filter Cover Knob for Briggs and Stratton
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Air Filter Cover Knob for Briggs and Stratton by RebelTaz This is a common style air filter on several Briggs and…
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 549
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Air Filter Cover Knob for Briggs and Stratton
by RebelTaz
This is a common style air filter on several Briggs and Stratton engine models. From what I have found, it can replace part numbers 844618 / 691985 / 491875 and probably others. For this, you will need a 7/16 hex nut with the proper threads to match your stud. Simply print the parts in the orientation given, drop your nut into the knob and press the plug in above the nut, with the beveled end down. This locks the nut in place and give the knob a more finished look.
For strength, I recommend 1.6mm walls with 40% triangular infill.
Print Settings
Printer Brand:
TEVO
Printer:
Tarantula
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
40%
Notes:
For strength, I recommend 1.6mm walls with 40% triangular infill.
Category: Sport & Outdoors