1 / 2
Toggle-action Latch
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I redesigned this to fit a small shed I own. It is nearly identical to the original with all edges rounded and some improvements like a resizable shim under the "receiver" and strengthened the screw pillars.
The holes are 4.3mm to accept a 4.3mm M4 wood screw about 35mm long.
Print in PETG for outdoor use. Print all parts as oriented. I used a brim for the springs and the receivers. The receiver should have enough perimeters to make it solid.
STEP files can be provided if requested.