Navarre Tool Holder Trash Bag Clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This print clips into half of the tackle slot and holds a standard dog-waste bag open for trash
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 188
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The Navarre Kayak Fishing tool holder on the Old Town Autopilot 120 / 136 is great for tools but has no place for small trash.
This print clips into half of the tackle slot and holds a standard dog-waste bag open for line clippings, soft plastic scraps, and other debris. The other half of the slot remains available for a Plano 3500 box.
When the bag fills up, pull it out and throw it away. The clip can stay installed between trips.
What It Is
This is a small bracket that:
Clips into the Navarre tool holder tackle slot
Holds a dog-waste bag open
Uses about half the slot width
Leaves room for a Plano 3500 tackle box
It provides a place for small trash while fishing.
Printing
Recommended materials:
PETG
ASA
These handle sun exposure and heat better than PLA.
Typical settings:
0.2 mm layer height
5-6 walls
15–25% infill
No supports required.
Installation
Slide the bracket into the tackle slot of the Navarre tool holder
Pull a dog-waste bag from the roll
Open the bag and tuck the rim under the frame
Fish
Remove and discard the bag when finished.
The bracket can stay on the tool holder between trips.
Compatibility
Designed for:
Navarre Kayak Fishing Tool Holder
Old Town Autopilot 120 / 136
Notes
Dog-waste bags work well because they are compact, waterproof, and easy to replace. I keep a roll in the kayak and pull one as needed.
Typical uses:
Line clippings
Torn soft plastics
Packaging scraps
Snack wrappers