PrinceMas Ornament with Lighted Base
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
PrinceMas Ornament with Lighted Base by RebelTaz Ok... technically, the lighted base is all that is by me. The…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 137
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
PrinceMas Ornament with Lighted Base
by RebelTaz
Ok... technically, the lighted base is all that is by me. The original ornament belongs to @DirtyFacedKid and can be found here. I extended the ornament down so that it could be slipped into a base and modeled the base you see here. It is designed to accept these USB LED chips from Amazon. Feed the wire of a 5vdc power supply through the hole, wire it to the chip and cement it down. I made a little trough so that the chip could be oriented either way - with the LEDs closer to the ornament or farther away, whichever you find gives a better result. The fit of the ornament in the slot is a little loose so that you can remove the ornament and hang it on your tree when not using the base.
After I got finished, I had the idea that I should have printed it in purple, so I printed another one in Purple Haze translucent PLA. By itself, that looks amazing, but when combined with the extremely bright light from the LED chip, I actually liked the white better.
My mother, a complete Prince freak, is going to love this. All thanks for this goes to @DirtyFacedKid.
✞ Merry CHRISTmas ✞
Print Settings
Printer Brand:
TEVO
Printer:
Tarantula
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
100%
Category: Decor