PrinceMas Ornament with Lighted Base
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
PrinceMas Ornament with Lighted Base by RebelTaz Ok... technically, the lighted base is all that is by me. The…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 10
- Makes
- 0
- Views
- 138
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
PrinceMas Ornament with Lighted Base
by RebelTaz
Ok... technically, the lighted base is all that is by me. The original ornament belongs to @DirtyFacedKid and can be found here. I extended the ornament down so that it could be slipped into a base and modeled the base you see here. It is designed to accept these USB LED chips from Amazon. Feed the wire of a 5vdc power supply through the hole, wire it to the chip and cement it down. I made a little trough so that the chip could be oriented either way - with the LEDs closer to the ornament or farther away, whichever you find gives a better result. The fit of the ornament in the slot is a little loose so that you can remove the ornament and hang it on your tree when not using the base.
After I got finished, I had the idea that I should have printed it in purple, so I printed another one in Purple Haze translucent PLA. By itself, that looks amazing, but when combined with the extremely bright light from the LED chip, I actually liked the white better.
My mother, a complete Prince freak, is going to love this. All thanks for this goes to @DirtyFacedKid.
✞ Merry CHRISTmas ✞
Print Settings
Printer Brand:
TEVO
Printer:
Tarantula
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
100%
Category: Decor