Lightweight planter pots – 90mm & 110mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A set of lightweight planter pots designed to minimize filament usage and print time.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 49
- Wydruki
- 0
- Wyświetlenia
- 137
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A set of lightweight planter pots designed to minimize filament usage and print time while maintaining sufficient strength for everyday use.
The model uses an optimized double-wall construction.
The outer patterned wall is specifically designed to be printed as a single continuous extrusion line (~0.45 mm width), while the inner wall provides additional structure.
The surface pattern allows clean printing with no infill, significantly reducing material consumption and print time.
Total wall thickness is limited to just two walls, making the design highly efficient without unnecessary material usage.
📏 Sizes:
90 mm – ~51g of filament
110 mm – ~72g of filament
⚙ Print Settings (recommended):
Line width: ~0.45 mm
Infill: 15%
Layer height: 0.2 mm
Material: PLA / PETG
💡 Notes:
Outer wall is designed for single-line extrusion — changing line width may affect appearance
Using scarf seams is recommended for best visual results
