Engagement & Wedding Ring Box - Dog Figure Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Functional wedding ring box featuring a dog figure holder. 3D-printed case with a hinge, perfect for engagement rings
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 273
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Public Domain
Assembly Instructions
Dog Mouth: The dog's mouth is printed solid to ensure high print quality. After printing, use small flush cutters (nippers) to carefully snip the small bridge/support closing the mouth. This will allow the ring to be inserted.
Base Assembly: Glue the platform with the dog onto the bottom of the box using a small amount of CA glue (Super Glue).
Hinge Pin: For the hinge, simply use a short piece of 1.75mm filament. Cut it to the required length and slide it through the holes in the lid and the base.
Alternative Dog Models: I’ve included two versions of the dog. One features standard symmetrical ears, and the other has one ear up and one ear down - just like my own dog.