Engagement & Wedding Ring Box - Dog Figure Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Functional wedding ring box featuring a dog figure holder. 3D-printed case with a hinge, perfect for engagement rings
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 27
- Makes
- 0
- Views
- 273
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Public Domain
Assembly Instructions
Dog Mouth: The dog's mouth is printed solid to ensure high print quality. After printing, use small flush cutters (nippers) to carefully snip the small bridge/support closing the mouth. This will allow the ring to be inserted.
Base Assembly: Glue the platform with the dog onto the bottom of the box using a small amount of CA glue (Super Glue).
Hinge Pin: For the hinge, simply use a short piece of 1.75mm filament. Cut it to the required length and slide it through the holes in the lid and the base.
Alternative Dog Models: I’ve included two versions of the dog. One features standard symmetrical ears, and the other has one ear up and one ear down - just like my own dog.