Nexus Pro / Max Stryker (1.0) Tuning Caps + Spring Spacers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mod parts that let you fine-tune blaster FPS by adjusting the installed spring’s pre-compression.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 59
- Wydruki
- 0
- Wyświetlenia
- 236
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
These Adventure Force Nexus Pro + Max Stryker FPS Tuning Caps + Spring Spacers allow you to increase and decrease FPS on various springs by changing the pre-compression of the installed spring. Ratings are based on actual chronograph readings with the stock spring.
FEATURES:
• Nexus Pro / Max Stryker Tuning Caps + Spacer
• Easily tune your FPS for various setups, games, etc
• Multiple FPS options.
• Simple near-toolless install
• Just replace the stock cap
• SE versions compatible with Special Edition / Painted Nexus
• Not compatible with the Nexus Pro X
PERFORMANCE:
Average FPS with the stock 1.7x190mm spring*
• ~100 (15) FPS with the 100 FPS cap
• ~130 (10) FPS with the 130 FPS cap
• 143 (8) FPS with the stock spring rest cap
• ~168 (6) FPS with the basic spring spacer
• ~175 (5) FPS with the 175 FPS cap
*Please note: Using the 175 FPS cap with an upgraded spring is not recommended and may damage the blaster. Do not store your blaster with the 175 FPS cap installed!
FILES INCLUDED:
1 Bambu Studio 3MF File with saved print settings, including:
• 3 Standard Tuning caps (OG 2020 Nexus Pro + Max Stryker)
• 3 Special Edition Tuning Caps (recolored 2022 Nexus Pro)
• 1 Basic/budget Spring spacer
RECOMMENDED PRINT SETTINGS:
• Quality: No scarf seams or joints
• Strength: 6+ wall loops; detect thin wall
• Others: Outer brim