Replacement Bottle for Soap Foam Dispenser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The replacement bottle for automatic soap foam dispenser.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 32
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The replacement bottle for my automatic soap foam dispenser broke and could no longer be used, so I made a new replacement bottle.
To minimize the use of supports during printing, I divided it into two parts: the cap and the bottle. Therefore, I recommend firmly bonding them together with adhesive afterward.
I used PETG for testing, but I believe other filament materials should work just as well.
In a simple test, I confirmed that it doesn't leak water. However, I recommend lightly coating the interior with something like UV-curable resin before use.
(I made an indentation on the bottom for anti-slip purposes, but this area is rough and can easily accumulate water scale, so I think it would be good to coat the bottom as well — though I haven't verified this.)
Happy printing!