UV Flashlight Cap and Stand for Resin Curing with Fiber Optic Cable
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Makes transfer of 405nm UV light to interior of hallow resin prints much easier and more effective
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 63
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
28.02 ID press fit cap with stand to make curing times easier. Stand allows turning flashlight on and off with more stable stance
I cut various size pieces of the fiber optic to get higher up in the models
Modeled for this UV Flashlight: https://a.co/d/0e96HoKN UV protective goggles highly recommended
I purchased this Fiber Optic in 1.5, but larger is probably better: https://a.co/d/0iFmqapa
Honestly, I don't know how well it works, but it seems to do the trick for me. Make sure the model has time to dry/"air out" if cleaning with alcohol before curing