UV Flashlight Cap and Stand for Resin Curing with Fiber Optic Cable
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.53 – €0.65 net (excluding VAT)
For file: UVFlashlightCap_0.6n_0.25mm_PLA_COREONE_28m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.59 excluding VAT (range midpoint).
- Weight reported by the author
- 10 g
- Print time reported by the author
- 28.2 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Makes transfer of 405nm UV light to interior of hallow resin prints much easier and more effective
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 3
- Makes
- 0
- Views
- 63
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
28.02 ID press fit cap with stand to make curing times easier. Stand allows turning flashlight on and off with more stable stance
I cut various size pieces of the fiber optic to get higher up in the models
Modeled for this UV Flashlight: https://a.co/d/0e96HoKN UV protective goggles highly recommended
I purchased this Fiber Optic in 1.5, but larger is probably better: https://a.co/d/0iFmqapa
Honestly, I don't know how well it works, but it seems to do the trick for me. Make sure the model has time to dry/"air out" if cleaning with alcohol before curing