Tap Wrench Replacment Jaw Set
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A replacement set of jaws for a tap wrench. These are designed specifically for Harbor Freight's 40-Piece SAE/Metric…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 20
- Wydruki
- 1
- Wyświetlenia
- 268
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A replacement set of jaws for a tap wrench. These are designed specifically for Harbor Freight's 40-Piece SAE/Metric Pittsburgh Tap and Die sets (https://www.harborfreight.com/carbon-steel-sae-tap-and-die-set-40-pc-62831.html) -and- (https://www.harborfreight.com/carbon-steel-metric-tap-and-die-set-40-pc-62832.html), but they may work for other sets.
The jaws are for use with 1/16" to 1/2" or M3 to M12 sized taps. Both the stationary and moving jaw have 6mm threads. The moving jaw is reverse (left-handed) thread. On three of my four wrenches, the stationary jaw has standard, right-handed threads, but for some reason, one has left-handed threads. Go figure. So... there are pieces to suit either situation.
Recommended settings are No Supports; 0.2mm Layer Height; 4 Walls, 4 Top and 4 Bottom Layers; 40-70% Infill.
Print Settings
Printer Brand:
TEVO
Printer:
Tarantula
Supports:
No
Resolution:
0.2mm
Infill:
40%
Category: Parts