Liczymy pasujące modele…
Video by Teaching Tech - Teaching Tech was kind enough to make a review of this Bench Mountable Vise. It has some great info on downloading and assembling this design. !!! LUBRICATION: This design will not work without lubrication. I use…
EN ( FR plus bas) 3 clamping jaws Small and Medium can be reinforced with M4x35 mm screws A 10x2 mm circular magnet slot is provided on all three models for storage on the workbench leg when not in use. 3 .step files available 3 .stl…
The boxes for the monsters from Qualith 's great organizer insert were printed a little too tight and damaged the initiative tokens. So I quickly designed an insert as a lid and then labeled it. There is enough space for the initiative…
Printing Parameters: Material: TPU Resolution: 0.2 mm Perimeters: 2 Infill: 15 % Supports: no Surface: fuzzy
Simple JAWA FJ keychain. dimensions: 50x28x3mm, hole diameter 4,5mm best to print with PLA or PETG filaments if printing at 0,2mm layer height and want two color keychain, set up pause at layer 11 to change color best to print using 0,4mm…
To prevent the protective jaws from breaking, it is important to use a ductile, non-brittle material. Adjust thickness of rim flange to your needs in your slicer. Print instruction: material: FLEX hard or ductile ASA, PETG supports: no…
This is the bolt to thread into the Three Jaw Chuck and connect to your drill. https://www.printables.com/model/133491-25inch-three-jaw-chuck I epoxy an M6 bolt and drilled through the 2mm hole and inserted a nail to bond the two pieces.
This is a set of pieces that can be used to recreate the Jawa - Tattered Shirt figure at 500% scale. This figure was introduced in 2018 and appeared in 4 sets between 2018 - 2021. All of the stl files needed to create this have been…
A set of lathe spiders for lathe chucks with jaws up to 20mm wide. The chuck I made these for is a 160mm. I created a parametric model in Fusion so any depth or jaw width can be added if requested. Alternatively changes in depth can be…
I bought a crimping plier SN-58B and a jaw SN-2549 , but I found SN-2549 width 4mm and SN-58B width 6mm, so I create this 4mm to 6mm jaw adapter.
Simple, easy to print, wall mounted, hanger, tool holder for Worx 20V Max WG320 JawSaw tool. Extra walls in model for additional strength, printing with 4 perimeters works nicely. Mount with two screws 40mm apart. No supports needed.…
simple lathe spider that extends further than others I found and meant for a 4 jaw will make more varations in the future and improve one the design.
I made these to rebuild my Kawasaki H1 forks, they should work for any 36mm fork. 6x2 magnetic insert holes allow for press fit, which will keep the soft jaws in place while you work. I used IEMAI PETG CF with Anycubic Kobra S1, .6mm…
This jaw mechanism features a simple rotational design, allowing the jaw to be fully movable for natural articulation. It consists of two pieces on each side: a socket attached to the head and a connector attached to the jaw. The design…
A replacement jaw/clamp for a wokmate portable work bench (the original Black and Decker Workmate. Best printed with a more flexible filament to prevent the tangs from snapping. I have used PLA versions even with broken tangs as they hold…
Easy to print model of both Fox Skull and Jaw Vulpes sp. Original Model By RISD Nature Lab
WARNING: this is a beta version, still in work in progress. Half jaw to carry a bike frame by hand without loosening the cables. Versions: v0.1: a basic L comments: too large, still touching cables Print info: material: PETG nozzle:…
Textured and untextured replacement protective vice jaw caps for Bessey BVVB Vacuum Base Vise (BV-VB) . I tried to replicate the stock ones as close as possible for a first iteration, I may tweak the design a bit to remedy some…
This is just my variant of jaws for Heuer 120 vice, but for rectangular magnets (maximal size of magnets is 24x9x2mm). On flat surface you can glue on any material you want and then just cut it around.
The Model comes prealigned and shouldn't require Supports but will benefit from a Brim . The indented Areas can be used to Bucket Fill with Fuzzy Skin to aid in Grip when removing them. Personally I'd suggest printing a set of three or so…
Use these in your vice to assemble AN fittings and hose (or any hex-shaped fastener that you don't want to clamp with metal jaws). The jaws have the correct geometry for typical automotive fuel line AN fittings (I have used them for -6…
A dedicated page to a BCAR previously buried under hundreds of permutations of its predecessor. This BCAR uses the Celestial BCAR's geometry to make a set of progressive twist options, maintaining the original flange alignment, heavy…
Fork vise jaws for Marzocchi upside down fork as fitted on Triumph Speed Twin 1200 (2021-2024) 2 holes : one vertical, the other at an angle of 20 degrees. 53mm upper tube You can use 6 10x3mm magnets.
Needed new jaws for my 4 /12" Rigid vise. Printed these out of solid TPU and they bolt right on. May fit other vises, but Im do not know.
I wanted something softer than steel to hold certain projects in my shop, so I designed these jaw pads for my 7" Columbian wood vise. I printed them in PLA, and then did another set in TPU for an even softer grip. They work great!
Can be printed with PLA 0.4mm [email protected] layer height. Might also fit for other models
To protect objects from scratches or other damages i created some simple jaws for my bench vise. The model is very simple, just some covers to put on the bench vise made of TPU with higher shore hardness. I printed the jaws for a bench…
A set of custom jaws for a mini desktop vise by CCV to keep the PCBs at a 45, 60 or 90 degrees angle.
adjust to prefered size use 0.16 or lower for better quality in details some support is needed
As I so often do, I went looking for something I need on all the usual STL sites, but to my great surprise, I couldn't find replacement pads for my ChannelLock Soft Jaws (415SJ)... sure, I found soft jaw attachments for regular…
Print with the hex shaped pegs flat on the bed for strength and use at least 3 perimeters. I used ASA, but PETG will probably work, don't recommend PLA. The screw holes will likely need to be drilled out to fit properly. To assemble: open…
When printing this product make sure to think about the fact that the size stated is when the product is fully open. Originally made to hold fork legs on a motorbike under service, can be used in other scenarios if needed.
I thought a Jaws inspired dice tower would be cool. It could also be used as a decor item for a trinket tray or anything of the sort. I used 10 percent infill and only critical region supports, and it printed without issue on my p1s. If…
This model is compatible with the lego system.
Universal fitting soft jaws for your vise. Each piece is press fitted with a standard 8mm round magnet. A little dab of glue can be used, but not necessary. Universal fit from 2-1/2" to 6" (70-150mm). Magnets allow for quick insert and…
A new 3D figurine generated by AI, a Chibi Jawa (Star Wars). I print my models on a slightly ageing printer. I try to find the best quality/time ratio for my prints. I print these models in fairly small formats, and the quality of the…
Chuck which can be slid onto a shart of a nema17 motor and locked on with an M4 screw.
Designed around the IRWIN 6” Vise This design features embedded Neodymium rare earth magnets To allow quick interchange between the steel jaws and printed jaws, this design also features pass-through holes for a more permanent mounting…
This model is compatible with the lego system.
This model is compatible with the lego system.
The design by Qualith did not fit my cards, as measured them to 95.5mm but the slot is only 95.2mm. I increased the width to 95.7mm.
Clip-on ledges (serifs) The most important addition. Two small ledges are added to the inner profile of each pad - one at the bottom gripping the underside of the jaw, and one at the front edge gripping the top of the jaw. Together they…
I saw a picture of a Udanoceratops and thought it needed to be a 3D flexi model. It's cute-ugly in a Bruegel sort of way. Hieronymus Bosch springs to mind as well. I'm sure I have seen one of these in one of their paintings. Please like…
My friend broke the end of my clamp off so I made a replacement jaw end Not as strong as original but if you used special filament like nylon or even resin printer it may work great
A storage for hex bits in a form of a jaw. Hinge is print-in-place with 0.2 XY clearance. I'd advise a test print of the upper part only if you're unsure whether XY compensation is needed to preprly print it. Requires 32 5x2mm magnets…
Replacement jaws for an old PanaVise. Make sure your vise has 42.5mm screw spacing, otherwise it won't fit. I printed this with 4 perimeters for strength.
This is my take on Trap Jaw from the Masters of the Universe. The model features Lockjaw on a rocky base with the Master of the Universe logo below. You might have to scale it to fit your needs. I hope you really enjoy and consider…
Vise Jaws that fit a very common found mini vise just like in the pictures. Optimized to hold PCBs while soldering. Has 2 places where a board can be clamped. Can hold PCBs up to 76mm wide.
I found an image of the jaw on Pinterest and used https://image-to-stl.com/?utm_source=chatgpt.com to convert it into a STL file.
GForce Jawbone AR9 / Foxtrot Mike FM-9 / VFM-9 friction fit upgrade for charging handle. Some different designs that are easier to work and clear the picatinny rail for the use of a front site. Making a straight and angled one of each for…
Technical Specifications: Multi-Range Robotic Gripper Jaws This design offers a highly versatile solution for robotics and automation. It features three distinct gripper zones to handle a wide variety of parts. Instead of relying on…
If you've ever tried to hold a bolt with its head in the jaws, you will know the angel-like squealing that can be heard right before the bolt turns sideways and you hit your knuckles onto the vise. Say no to fistbumping your vise and…
Print with textured face down. I printed with 6 parameters to help strength, but they're thin, so do whatever. I used PLA. It'll be fine for my uses. Print one for the fixed jaw, one for the moving jaw. You can print one or both or…
an attempt to make a 3D printed Karinding, a traditional Sundanese Jaw Harp
The lower jaw of a domestic cat, I needed it mostly because I had a real cat skull that lacked a lower jaw, so it wouldn't be laying on it's own, I decided to find and print a lower jaw for it.
This is another in a series of color mix experiments with translucent filament. This uses red, white, and blue translucent colors to build up the layers to make all the color variations. I used Google Gemini to create the black and white…
This is a repair of an old Harbor Freight ratchet clamp (which I have repaired twice before!). As can be seen in the photos, one of the plastic jaws broke (again), so I decided to try replacing the entire jaw. Unlike some other similar…
These protective jaw pads are designed specifically for Inforce clamps. Printed in flexible TPU, they absorb clamping pressure and prevent marks on delicate or finished surfaces — wood, metal, or painted parts. Simply slip them onto the…
Massive Schoblacken für 135mm Schraubstock. Duch die Vertikale und Horizontale V-Nut können auch Runde Teile und Rohre sicher gespannt werden.
Velikost magnetu 10x2mm. Používám obyčejné vteřinové lepidlo k uchycení magnetu a drží velice dobře. Tisk z černého + červeného PLA ale i samotná černá barva nevypadá vůbec špatně.
My Stanley Maxsteel minivice was delivered with only one soft jaw protector. Here the replacement TPU printable part, made with Fusion360.
Fully customisable and parametric Soft Jaws for your vice, bench clamp, etc. OPENscad customiser: Enter the length, depth and height of your vice jaws, the required soft pad thickness, and the thickness of the top and side walls. You can…
Micrometer stand NEW 24 Aug 2023 Published new model with some improvements - Better and faster print https://www.printables.com/model/562157-micrometer-stand derivative of the nice design of Wehrenseb Changes: wider base so it doesn't…
a imprimer en petg n'oubliez pas de poster vos photos de vos prints ça fait toujours plaisir !
Tested and printed without issues using Cura slicer. 1 : 7 → 1 : 8 = 87,5 % Hi guys, this is the model of beautiful and legendary czechoslovakian 50cc moped, it's easy to print and it comes in multiple scales. This "bike" maybe isn't very…
Tested and printed without issues using Cura slicer. Hi guys, this is the model of Positionable figure of a Cartoon Czechoslovakian biker in 1/18 scale, fittable for my Jawa 50 moped (1/18). Always remember: Print, Dry fit, File, Dry Fit…
just another soft jaws design fits 140mm jaws, like our "Matador" brand There is place for two small magnets diameter 5mm height 3mm, to keep the jaws attached to the vice. Edit 5 december 2023 Added model with side clips, so doesn't need…
This is model is designed to be printed with a Bambu Lab AMS or similar. I recommend printing with a .2mm nozzle at .14mm layer height. The best sheet magnets I have found to use with this model is Marietta Magnetics brand 30mil (with…
I made these 53 mm external jaws to fit bowls I made with the Nova chuck with standard jaws on the SC1 so I could finish or post-work the bottoms of bowls more easily. The SC1 is so small (51 mm diameter) it is not in the way when…
Things needed: 8mm x 200mm trapezoidal screw and nut 2x m3x8 screw (for rail alloy) 4x m3x8-16 screw or 3.0x8-16 screw (2 will suffice) for the trapezoidal nut 2x bearings 688 (8x16x5) The knobs go in very tightly, so you should be ok…
Fits standard 6" (Kurt) machinist vices where bolt holes are 3.875" from center of each other. Use two pins that correspond to the angle you want (ex. for 0, 1, 2, 3, etc. degrees need to have a pin on in one of the A's on the left side…
I needed a pair of vise protective jaws to clamp sensitive materials securely without scratching or denting them. The notches make it possible to clamp round or oval workpieces and prevent them from slipping off in any direction. Due to…
klíčenky jsou vytvořeny pro průšu s MMU nebo bambulabku s AMS k vybarvení používám prusaslicer, funkci chytré vybarvení klíčenky loga československé firmy jawa, která vyráběla motocykly a automobily první model je staré logo JAWA, ve…
This is an addition to the Gridfinity storage system designed by Zach Freedman of Voidstar Labs who “stole” it from Alexandre Chappel. I made this storage for the Sherline ER-16 3-Jaw Chuck and Tommy Bars. It uses a 2x3 area of the grid.…
Used to hold cylindrical objects with a clamp or vice. Designed to be used with Michael Hornung's Miter Box Can hold up to 3 rods between 6-12mm diameter. You can choose to use 1 - 4 jaws to hold your work. 6mm rods will be too small to…
Motivation The xTool RA2 rotary is a great accessory, but the included chuck jaws have a few shortcomings: Workpieces with shallow stepped inside geometry (lip) are difficult to get a good and even grip especially when tapered Outside…
Jaw Protectors for Knipex 86 XX 250 and 86 xx 150. Print in TPU or PETG or even PLA. A little more flexible material may last longer. Update 29.3.2024: Added Fusion360 drawing on users request. Print Settings Printer Brand: Prusa Printer:…
Soft jaws for the BESSEY 4 in. Drill Press Vise Available at home depot. Perfect for printed circuit boards and things you don't want to mar with the included jaws. www.homedepot.com/p/BESSEY-4-in-Drill-Press-Vise-BV-DP40/205023096 7mm…
Hi grab insert I have modeled for Jaws of the Lion board game. It perfectly store all components and fits the box with sleeved cards. On the photos I tried to capture components arrangement. Please leave your like if you appreciate my…
I couldn't find one so I made my own. added an mmu version
Designed some soft jaws for my vice. the jaw size is 101x20x20mm
Don't rely on the chamfers in this model. I found on my k02-63 chuck, nearly every single chamfer was different, I suspect they are made eye in the factory.
https://cad.onshape.com/documents/d277cef1332f9b11126bbda5/w/e26dfcdf5f902c434e75cce5/e/c90c8f89b02f60ca2270a13c This is where I changed the Jaws. with this link, I think you can make any changes easily. I like using Onshape because it…
Soft printed jaws for a vise. Instructions: Intended material is PETG, printed 0.2 layer height where the back-side grid pattern contacts the metal face of the jaws. Print face-down so first layer becomes the new face of your jaw covers.…
These are protective jaws for the Brockhaus Heuer vice with 120 mm jaws that I made some time ago. They are designed to be easy to print with cheap material. I printed them with PLA, but I think that PETG is better suited, because it is…
Jaws of the Lion 3D printed insert. Remixed longer parts of original design.
In one of those weird little accidents I recently knocked off one of the jaw pads from one of my clamps and lost it in the water. This is a replacement part for either the upper or lower jaw pad for a 24 inch Dewalt 600 lbs. trigger clamp…
This is a much more detailed speaker insert than the one that comes on the LE model or the ones that are found for sale on Pinside. This insert has the exact same dimensions and hardware holes as the insert that is included with Stern’s…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
![[beta] Half jaw to carry bike frame by hand](https://media.printables.com/media/prints/7cf5b16b-3c19-4c67-bc20-aa7531c2f179/images/10485861_6c539980-0a07-4f56-8f3d-3136fa0cb263_97e24832-a6d6-4e01-b361-9486f3761c40/bike-frame-support-v1.png)
