1,104 models
Video by Teaching Tech - Teaching Tech was kind enough to make a review of this Bench Mountable Vise. It has some great info on downloading and assembling this design. !!! LUBRICATION: This design will not work without lubrication. I use…
Legendary moped Jawa 50/21 Pionyr from Czechoslovakia 1967-1978. 50ccm, 3,5HP, Scale model in 1/10 - 20 cm length Manual in .PDF (Czech) Designed for SLA/DLP printer! Only for personal use and gift! https://www.buymeacoffee.com/mochr
Push your broom between the jaws and it will stay. Printed w/ Filaflex40 and PLA. The flex part came out kind of stringy, but a quick torch clean up of the business side, and it looks great. I left the string on the back to assist in the…
A new organizer with little waste of material that actual fits everything. I really like the ideas behind some organizers that I saw at Thingy, but they use very thick walls and big filling blocks that add time and material in excess. So…
Jawa 500 OHV – Rumpál, byl první motocykl značky JAWA. Motocykl byl vyvinut německou firmou Wanderer (model K 500), poté byly odkoupeny práva p. Janečkem, a tím vznikla značka JAWA – JA neček – WA nderer. Motocykl měl čtyřdobý, vzduchem…
Legendary moped Jawa 50/23 Mustang from Czechoslovakia 1969-1982. 50ccm, 3,5HP, Scale model in 1/10 - 20 cm length Manual in .PDF (Czech) Designed for SLA/DLP printer! Only for personal use and gift!
No support Jawa from Star Wars. Colored 3mf included.
I think this is a beautiful scan put out by the Auckland Museum, I just wanted to try and make it more printable and the edges and delicate jaw cartilage strong enough, was fun trying to get it to work with remeshing and other trial and…
Remix of https://www.thingiverse.com/thing:4742896 and https://www.thingiverse.com/thing:308335 File comes sliced due to model complexity and size. Full version also provided. I have added in pegs and holes for easier assembly. File is…
Model of Czech motorbike Jawa 250 (cca 1960). It's semiscale, it's not perfect shapes as original. movable wheels and steering . For spoke use 0,6mm steel wire and montage in pripravek_kolo.stl. some M2x6 screw fot complete and CA glue.…
Hello Here is my biggest project. It is a complete 3D model of Jawa-ČZ 250/353.02 motorcycle, made in 1955 year in Czechoslovakia for export. The creating of the model took more than 6 years because i have not any blueprints and all part…
The jaw is printed on the body so you don't have to stick it on anymore
Remix of Hand Push/pump drill with stronger replaceable jaws, the lower part was too weak new one is stronger
FUTURE TASKS Specialized jaws for specific tasks Maybe some kind of fast exchangeable jaws or adapters ------------------------------------------------------- ADD-ONS Connectors jaws great for handling balbulab x1/c/p1p hotend connectors…
I am fairly new to JOTL, but I liked UnclePats player dashboard so much (lightweight, easily fits into the games box (even two of them like in my case), easily to understand but still versatile layout, ...) so much that I tried to improve…
Jaw Protectors for Knipex 86 XX 250 and 86 xx 150. Print in TPU or PETG or even PLA. A little more flexible material may last longer. Update 29.3.2024: Added Fusion360 drawing on users request. Print Settings Printer Brand: Prusa Printer:…
Parallel jaw pliers: open the handles and the jaws move apart while the gripping surfaces remain parallel to each other. Print two jaws and one each of handle A and B. Print the parts in the orientation shown. You may want to use support…
These boxes can be used to store the components for Jaws of the Lion classes. This page contains the character-specific files meant to be used with the base box here . For each box you will need to print 3 models: one of the…
Jaw Inserts for bench vice (universal version) When I designed and created jaw inserts type for bench vice YORK 80 (" https://www.prusaprinters.org/prints/2449-jaw-inserts-for-bench-vicevise-york-80 ") so I designed and created universal…
Jaw Inserts for bench vice YORK 80 I designed and created jaw inserts (for bench vice YORK 80) type: C (centering) size 1 C (centering) size 2 F (flat) S (special for screw ISO4762) perfect fit you can use different combination of inserts…
T800 with jaw ring EDIT: All my apologies, I uploaded a file with unrenforced jaw, its now fixed, I added jaw only file for print for those who have already downloaded it. Print it as provided for details and solidity. Assemble once…
These attachments are designed to clamp the tumblers from the inside of the mouth. This allows you unobstructed access to fully engrave/etch the entire outside of the tumbler without the jaws interfering with the laser head. There is a…
Hardware needed: (2x) M3x8 countersunk screws (3x) M3x12 countersunk screws CA glue (super glue) Printing: This model is designed for 0.2mm layer height. I used 4 perimeters and 100% infill with ColorFabb XT-CF20 and a 0.4mm nozzle.…
Lidl POWERFIX Profi+ / PARKSIDE Clamp replacement JAW You clamped something too hard, didn't you. ... too hard for your OLD CLAMP! Because this one is (probably) much stronger! Replacement for broken Lidl POWERFIX Profi+ clamp jaw (300mm,…
Use this at your own risk and caution! I needed some specialty jaws for holding a finished workpiece without damaging the surface. For this, I designed these special jaws to an exact fit. These jaws fit on the Teknatool SuperNova Series…
These are a mash-up of mdkendall's Parallel Jaw Pliers and P-atix's Self Lock Pliers. I printed them as tubing pliers, but they can be used to hold just about anything on two flat faces instead of on vertexes like most pliers or wrenches…
It is primarily a beer coaster, but there are no limits to its use.
držák zadního světla na moped S11/S22.
Jawa pionyr customized gasoline tank cap
This is a smaller version for use in tight spaces such as inside a printer when changing the hotend. As such it was design to be used with https://www.printables.com/model/383786-bambulab-x1cp1p-connector-jaws-mrw
Lze vytisknout i vícebarevně po vrstvách bez použití MMU.
I made these adapters to use my Mitutoyo 530-122 vernier caliper to measure wear on my car disc brake rotors and avoid the outer lip left when the rotor sees a lot of wear. The offset should be 20 mm, if your printer is not accurate…
Bracket for holding regulator for Jawa/Cezeta motorcycles
This jaw mechanism features a simple rotational design, allowing the jaw to be fully movable for natural articulation. It consists of two pieces on each side: a socket attached to the head and a connector attached to the jaw. The design…
a imprimer en petg n'oubliez pas de poster vos photos de vos prints ça fait toujours plaisir !
Universal fitting soft jaws for your vise. Each piece is press fitted with a standard 8mm round magnet. A little dab of glue can be used, but not necessary. Universal fit from 2-1/2" to 6" (70-150mm). Magnets allow for quick insert and…
I saw a picture of a Udanoceratops and thought it needed to be a 3D flexi model. It's cute-ugly in a Bruegel sort of way. Hieronymus Bosch springs to mind as well. I'm sure I have seen one of these in one of their paintings. Please like…
This is my take on Trap Jaw from the Masters of the Universe. The model features Lockjaw on a rocky base with the Master of the Universe logo below. You might have to scale it to fit your needs. I hope you really enjoy and consider…
I don't have a bunch of wingnuts, and I figured this would actually be a good place for a large plastic wingnut. It might be a little more in the way, but it's easier to use with cold, wet hands, and it's less likely to scratch anything…
A Compoundbow kickstand for approx. 50 mm wide and 5-10 mm high limbs. Softcover made out of TPU to protect the limbs.
Vise Jaws that fit a very common found mini vise just like in the pictures. Optimized to hold PCBs while soldering. Has 2 places where a board can be clamped. Can hold PCBs up to 76mm wide.
EN ( FR plus bas) 3 clamping jaws Small and Medium can be reinforced with M4x35 mm screws A 10x2 mm circular magnet slot is provided on all three models for storage on the workbench leg when not in use. 3 .step files available 3 .stl…
The boxes for the monsters from Qualith 's great organizer insert were printed a little too tight and damaged the initiative tokens. So I quickly designed an insert as a lid and then labeled it. There is enough space for the initiative…
Printing Parameters: Material: TPU Resolution: 0.2 mm Perimeters: 2 Infill: 15 % Supports: no Surface: fuzzy
Simple JAWA FJ keychain. dimensions: 50x28x3mm, hole diameter 4,5mm best to print with PLA or PETG filaments if printing at 0,2mm layer height and want two color keychain, set up pause at layer 11 to change color best to print using 0,4mm…
To prevent the protective jaws from breaking, it is important to use a ductile, non-brittle material. Adjust thickness of rim flange to your needs in your slicer. Print instruction: material: FLEX hard or ductile ASA, PETG supports: no…
This is the bolt to thread into the Three Jaw Chuck and connect to your drill. https://www.printables.com/model/133491-25inch-three-jaw-chuck I epoxy an M6 bolt and drilled through the 2mm hole and inserted a nail to bond the two pieces.
This is a set of pieces that can be used to recreate the Jawa - Tattered Shirt figure at 500% scale. This figure was introduced in 2018 and appeared in 4 sets between 2018 - 2021. All of the stl files needed to create this have been…
A set of lathe spiders for lathe chucks with jaws up to 20mm wide. The chuck I made these for is a 160mm. I created a parametric model in Fusion so any depth or jaw width can be added if requested. Alternatively changes in depth can be…
I bought a crimping plier SN-58B and a jaw SN-2549 , but I found SN-2549 width 4mm and SN-58B width 6mm, so I create this 4mm to 6mm jaw adapter.
Simple, easy to print, wall mounted, hanger, tool holder for Worx 20V Max WG320 JawSaw tool. Extra walls in model for additional strength, printing with 4 perimeters works nicely. Mount with two screws 40mm apart. No supports needed.…
simple lathe spider that extends further than others I found and meant for a 4 jaw will make more varations in the future and improve one the design.
I made these to rebuild my Kawasaki H1 forks, they should work for any 36mm fork. 6x2 magnetic insert holes allow for press fit, which will keep the soft jaws in place while you work. I used IEMAI PETG CF with Anycubic Kobra S1, .6mm…
This jaw mechanism features a simple rotational design, allowing the jaw to be fully movable for natural articulation. It consists of two pieces on each side: a socket attached to the head and a connector attached to the jaw. The design…
A replacement jaw/clamp for a wokmate portable work bench (the original Black and Decker Workmate. Best printed with a more flexible filament to prevent the tangs from snapping. I have used PLA versions even with broken tangs as they hold…
Easy to print model of both Fox Skull and Jaw Vulpes sp. Original Model By RISD Nature Lab
WARNING: this is a beta version, still in work in progress. Half jaw to carry a bike frame by hand without loosening the cables. Versions: v0.1: a basic L comments: too large, still touching cables Print info: material: PETG nozzle:…
Textured and untextured replacement protective vice jaw caps for Bessey BVVB Vacuum Base Vise (BV-VB) . I tried to replicate the stock ones as close as possible for a first iteration, I may tweak the design a bit to remedy some…
This is just my variant of jaws for Heuer 120 vice, but for rectangular magnets (maximal size of magnets is 24x9x2mm). On flat surface you can glue on any material you want and then just cut it around.
The Model comes prealigned and shouldn't require Supports but will benefit from a Brim . The indented Areas can be used to Bucket Fill with Fuzzy Skin to aid in Grip when removing them. Personally I'd suggest printing a set of three or so…
Use these in your vice to assemble AN fittings and hose (or any hex-shaped fastener that you don't want to clamp with metal jaws). The jaws have the correct geometry for typical automotive fuel line AN fittings (I have used them for -6…
A dedicated page to a BCAR previously buried under hundreds of permutations of its predecessor. This BCAR uses the Celestial BCAR's geometry to make a set of progressive twist options, maintaining the original flange alignment, heavy…
Fork vise jaws for Marzocchi upside down fork as fitted on Triumph Speed Twin 1200 (2021-2024) 2 holes : one vertical, the other at an angle of 20 degrees. 53mm upper tube You can use 6 10x3mm magnets.
Needed new jaws for my 4 /12" Rigid vise. Printed these out of solid TPU and they bolt right on. May fit other vises, but Im do not know.
I wanted something softer than steel to hold certain projects in my shop, so I designed these jaw pads for my 7" Columbian wood vise. I printed them in PLA, and then did another set in TPU for an even softer grip. They work great!
Can be printed with PLA 0.4mm [email protected] layer height. Might also fit for other models
To protect objects from scratches or other damages i created some simple jaws for my bench vise. The model is very simple, just some covers to put on the bench vise made of TPU with higher shore hardness. I printed the jaws for a bench…
A set of custom jaws for a mini desktop vise by CCV to keep the PCBs at a 45, 60 or 90 degrees angle.
adjust to prefered size use 0.16 or lower for better quality in details some support is needed
As I so often do, I went looking for something I need on all the usual STL sites, but to my great surprise, I couldn't find replacement pads for my ChannelLock Soft Jaws (415SJ)... sure, I found soft jaw attachments for regular…
Print with the hex shaped pegs flat on the bed for strength and use at least 3 perimeters. I used ASA, but PETG will probably work, don't recommend PLA. The screw holes will likely need to be drilled out to fit properly. To assemble: open…
When printing this product make sure to think about the fact that the size stated is when the product is fully open. Originally made to hold fork legs on a motorbike under service, can be used in other scenarios if needed.
I thought a Jaws inspired dice tower would be cool. It could also be used as a decor item for a trinket tray or anything of the sort. I used 10 percent infill and only critical region supports, and it printed without issue on my p1s. If…
This model is compatible with the lego system.
Universal fitting soft jaws for your vise. Each piece is press fitted with a standard 8mm round magnet. A little dab of glue can be used, but not necessary. Universal fit from 2-1/2" to 6" (70-150mm). Magnets allow for quick insert and…
A new 3D figurine generated by AI, a Chibi Jawa (Star Wars). I print my models on a slightly ageing printer. I try to find the best quality/time ratio for my prints. I print these models in fairly small formats, and the quality of the…
Chuck which can be slid onto a shart of a nema17 motor and locked on with an M4 screw.
Designed around the IRWIN 6” Vise This design features embedded Neodymium rare earth magnets To allow quick interchange between the steel jaws and printed jaws, this design also features pass-through holes for a more permanent mounting…
This model is compatible with the lego system.
This model is compatible with the lego system.
The design by Qualith did not fit my cards, as measured them to 95.5mm but the slot is only 95.2mm. I increased the width to 95.7mm.
Clip-on ledges (serifs) The most important addition. Two small ledges are added to the inner profile of each pad - one at the bottom gripping the underside of the jaw, and one at the front edge gripping the top of the jaw. Together they…
I saw a picture of a Udanoceratops and thought it needed to be a 3D flexi model. It's cute-ugly in a Bruegel sort of way. Hieronymus Bosch springs to mind as well. I'm sure I have seen one of these in one of their paintings. Please like…
My friend broke the end of my clamp off so I made a replacement jaw end Not as strong as original but if you used special filament like nylon or even resin printer it may work great
A storage for hex bits in a form of a jaw. Hinge is print-in-place with 0.2 XY clearance. I'd advise a test print of the upper part only if you're unsure whether XY compensation is needed to preprly print it. Requires 32 5x2mm magnets…
Replacement jaws for an old PanaVise. Make sure your vise has 42.5mm screw spacing, otherwise it won't fit. I printed this with 4 perimeters for strength.
This is my take on Trap Jaw from the Masters of the Universe. The model features Lockjaw on a rocky base with the Master of the Universe logo below. You might have to scale it to fit your needs. I hope you really enjoy and consider…
Vise Jaws that fit a very common found mini vise just like in the pictures. Optimized to hold PCBs while soldering. Has 2 places where a board can be clamped. Can hold PCBs up to 76mm wide.
I found an image of the jaw on Pinterest and used https://image-to-stl.com/?utm_source=chatgpt.com to convert it into a STL file.
![Jaw Inserts for bench vice[vise] (universal version)](https://media.printables.com/media/prints/2452/images/15629_ee6f5f2b-b733-46ea-b26d-e73666b1b56f/js_3dt-vice_asm_uni_jaw-inserts.png)
![Jaw Inserts for bench vice[vise] YORK 80](https://media.printables.com/media/prints/2449/images/15556_0ac727a6-fa35-4a03-941c-a35dcfcf4178/00.jpg)
![[beta] Half jaw to carry bike frame by hand](https://media.printables.com/media/prints/7cf5b16b-3c19-4c67-bc20-aa7531c2f179/images/10485861_6c539980-0a07-4f56-8f3d-3136fa0cb263_97e24832-a6d6-4e01-b361-9486f3761c40/bike-frame-support-v1.png)
