Lathe 3-Jaw Chuck Spider / Stop - set of 6
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A selection of chuck stops for short workpieces - 3-Jaw version. Thicknesses 5mm, 10mm, 13mm, 15mm, 20mm and 25mm
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 155
- Makes
- 1
- Views
- 567
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
A set of lathe spiders for lathe chucks with jaws up to 20mm wide. The chuck I made these for is a 160mm.
I created a parametric model in Fusion so any depth or jaw width can be added if requested.
Alternatively changes in depth can be altered by adjusting Z in the slicer.
The photos show the 5mm version in the chuck.
I have just added a 13mm since I needed one myself.
I also have a 4-jaw version modelled: https://www.printables.com/model/1287836-lathe-4-jaw-chuck-spider-stop-set-of-5
I have also introduced a Version 2 of the 3-Jaw which will allow a smaller minimum diameter workpiece - reduced from 20mm to 12mm.
https://www.printables.com/model/1466183-lathe-3-jaw-chuck-spider-stop-version-2
I printed in 3DQF PLA+