Lathe 3-Jaw Chuck Spider / Stop - set of 6
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A selection of chuck stops for short workpieces - 3-Jaw version. Thicknesses 5mm, 10mm, 13mm, 15mm, 20mm and 25mm
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 153
- Wydruki
- 1
- Wyświetlenia
- 559
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
A set of lathe spiders for lathe chucks with jaws up to 20mm wide. The chuck I made these for is a 160mm.
I created a parametric model in Fusion so any depth or jaw width can be added if requested.
Alternatively changes in depth can be altered by adjusting Z in the slicer.
The photos show the 5mm version in the chuck.
I have just added a 13mm since I needed one myself.
I also have a 4-jaw version modelled: https://www.printables.com/model/1287836-lathe-4-jaw-chuck-spider-stop-set-of-5
I have also introduced a Version 2 of the 3-Jaw which will allow a smaller minimum diameter workpiece - reduced from 20mm to 12mm.
https://www.printables.com/model/1466183-lathe-3-jaw-chuck-spider-stop-version-2
I printed in 3DQF PLA+