1 / 1
Protective jaws for mounting a tire to a rim - suitable for 38 inches
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
To prevent the protective jaws from breaking, it is important to use a ductile, non-brittle material. Adjust thickness of rim flange to your needs in your slicer.
Print instruction:
- material: FLEX hard or ductile ASA, PETG
- supports: no
- layer height: 0,2mm or 0,3mm
- nozzle diameter: 0,4mm or 0,6mm
- brim: recommended
- enclosure: not required
Disclaimer: Use of jaws is at your own risk.