Counting matching models…
Made for the Replacement Parts contest. The core model is a functional replacement for Presta and Shrader type dust caps as round on most cars and bicycles. After printing check internally for any hanging plastic which could depress the…
FJ Cruiser airless Tyre 1:10 for Rim: https://www.printables.com/cs/model/94963-rc-fj-cruiser-19-wheel-12mm-hex Material TPU (Flexible)
A printable rubber (eg NinjaFlex or other PU) tyre to fit on the standard Brompton bicycle rollers. It makes them a little larger, but not as much as the Eazy Wheels. It makes them much quieter, but of course adds no bearing. Print…
Robotic lawnmower replacement for front- and backwheel. Frontwheel with wider profile. The built tire consists of 3 parts so that it can be printed on a Prusa printer. Printed with PCTG or PETG with 20% infill an 4 perimeters. Tyres…
Hankook tyres log for office \ workshop
This model is compatible with the lego system.
This is a detailed version of the tyre for Mustang GT 500 Ford Shelby Mustang GT500 'Eleanor' Kit Card (known from 'gone in 60 seconds') by The Kit Card Guy | Download free STL model | Printables.com I have printed only with TPU, but I am…
Wheel hub for 30mm Ranglebox tyres . Compliant, designed to be printed out of TPU, I use the same hub with a gear fitting on my competitive Antweights (150g). Since moving to these we've had significantly less motor failures due to the…
It's a tyre I adapted for a 608 bearing to a nicer look. It can be printed using any filament but best rendering with TPU.
I needed new tires for my model car, and since they were no longer available, I designed them myself using Fusion 360 and printed them with TPU. I only had natural TPU available; black would certainly have been better. It works so far,…
just some tyres that fit the tamiya blitzer beetle that allow the car to slide around on smooth surfaces. use fuzzy skin for wheel texture. pictures show previous version with short side walls, new design matches oe wheel size
The cap of the base model was slightly too small to fit the air valve on my bike so I made this remix. I used the occasion to thicken the wall and to make it printable without supports. I originally intended to just do a small extrusion…
A pen holder inspired by F1 soft tyre design, featuring the iconic Pirelli branding. A fun and functional desk accessory for motorsport fans. The model is made of two separate print files, designed to be printed in sequence without…
I have added a modified file under the name Dowel into polystyrene V2, which is stripped of the window at the top of the body.
Valve with the Husqvarna logo imprinted on the top suitable for the tires of all cars and motorbikes
Optimized and ready to print model of: Valve Stem Cap w/ a D by Heli3D
Edit 21.4.2024 I created snap on lock for this press tool. Sometimes it slipped away without it. I find this also a lot of help when installing tight tires, you could just press and lock other side in rim and just install one side with…
This model is compatible with the lego system.
3d models of the mold used to build tyres for Megahub's educational robot. It depends from the silicon rubber that you're using but usually you have to wait 6-7 hours to dry the entire part (i suggest to wait 12 hours in anycase). Whatch…
This model is compatible with the lego system.
This model is compatible with the lego system.
A slightly alterned Version of ‘Hobbys’ Tyre Stick, now featuring collars at each end of the stick to prevent movement of the wheels when in use, wider locking prongs and also increased width of the body to more closely match the diameter…
Heres a tyre glue down clamp I designed. I had seen other designs, which were very popular but just to download the designs were quite expensive imo, however for me the biggest design flaw was that you were screwing into bare plastic,…
Tyrell Genetic Replicants - More Human Than Human, License Plate Frame Print Settings Printer Brand: Creality Printer: CR-10 Rafts: Doesn't Matter Supports: No Resolution: 0.2mm Infill: 25 Category: Signs & Logos
Intro: These are the rear tyres developed for the Breezebuggy outdoor play car (Paid model), but they can probably be used in other applications where hover board motors are desirable. The size allows for good volume to incorporate some…
This 3D-printed tyre is designed specifically for hoverboard motors to improve the speed. The tyre is printed without needing an inner tube. The design is optimized for strength and stability, but keep in mind that 3D-printed tyres wear…
These are a pair of rear tyres modeled for the Breezebuggy rideon playcar (paid model) that fit standard 6,5" hoverboard motors. The tyres might come in handy for robot projects or similar that uses hoverboard motors and need some extra…
This model is compatible with the lego system.
Hi, this is box for tyre gauge. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 Infill: 20% Filament: Plastika Trcek PLA Dark Blue Category: 3D Printing
I lost original dust cap remover for my car tyres. So I designed spare one. Printed only from PLA with default settings. Please, make sure that your bed is clean and use some 3Dlack spray. There are very tiny lines in the first layer :)
A special version for reinforced bike wall mount with special hook for SPD pedals. Tested with Shimano M520 pedals. I tested a other 3D design but my bike fall out of the mount and got damaged. Therefore I designed a super strong pedal…
EN: I made 2, 3, and 5 mm spacers for the base track / starting edge for polystyrene when adding insulation to my workshop. I'm also uploading a Fusion model for creating custom thicknesses. Slovensky: Vytvoril som dištančné podložky pre…
This is a detailed version of the tyre for Mustang GT 500 Ford Shelby Mustang GT500 'Eleanor' Kit Card (known from 'gone in 60 seconds') by The Kit Card Guy | Download free STL model | Printables.com I have printed only with TPU, but I am…
A spacer for bolting a duck head tool to a flat bar instead of mounting on a round tube.
A very simple, cost effective, robust, slot car tyre/tire scrubber for truing and balancing slot car tyres/tires for the cost of less than a coffee. You will need; 1. 2x Carrera 20366 replaceable braids 2. 1x PWM Controllers (Dimmer…
Aufbewahrungshalter für die IKEA Garnityren Deckel ( GARNITYREN Schüssel mit Deckel 5er-Set, versch. Farben - IKEA Deutschland ) Storage holder for the IKEA Garnityren lids ( GARNITYREN Schüssel mit Deckel 5er-Set, versch. Farben - IKEA…
This is a carbon fiber set of wheels and tyres for a vintage Kyosho Triumph buggy. I believe they would work on other 1/10 r/c buggies but I only tried them on the Kyosho. Because of the tolerances to correctly fit the bearings and axles…
Tyre for Landy 4x4 or truck 100mm OD x 35mm wide I designed this in order to print without supports so it has to be mirrored in order to have the tread direction correct for both sides of the car Enjoy! Print Settings Printer Brand: Prusa…
REMIXED Wheel for the Lego McLaren MP4/4. I just put the logos on the inside as well as the original logos on the outside. the MP4/4 had logos on the inside as well so it just a bit more realistic. Its hard to print but i got there…
Press onto a Schrader tyre valve steam and it will let the air out nice and easily without having to use a screwdriver, your fingernail etc to deflate it. Just press on to the valve and it will let air out relatively quickly. Just tested…
Changes to espr14's design: flat inner top, to allow better sealing if fully screwed on valve flat top to simplify printing in upside-down position printing advice: enable small perimeters for thread print in 0.2 or below print using PETG…
As seen on various other hobby machines, such as comm lathes for brushed motors, and introduced to me by Snuggler on freeslotter.de, this is an optional version of the Axle Bracket side pieces that will hold two 3mm x 6mm x 2.5mm ball…
This is for either a multi-colour printer or a single colour printer using the method as shown here. The case top is a multi part print. Using this method I still had to edit the G-Code to comment out lines that included T1 commands. I…
This model is compatible with the lego system.
My Dominator pool cleaner's tires has worn to a point where it just slips and doesn't want to move or climb the pool walls. A set of new tires costed almost 30% of a whole unit , so i decided to print and make my own tyres, which is a bit…
Polystyrene Injector for Wall Insulation Without Access. If you need to insulate your walls but have no access or cannot cut openings to insert polystyrene panels or rock wool, this custom tip allows you to inject polystyrene beads…
Measured from genuine front wheel,1:10 scale added lip for foam tyre This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/ltc3mbiAELG Category: 3D Printing
Measured from genuine rear wheel, I added a lip as I intend to fit some foam tyres and run on a 1/10 scale chassis This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/8aG0g3hz4jq Category: 3D Printing
Library you will need if you want to mess with the OpenScad https://github.com/vector76/gridfinity_openscad/
I needed more grip for my modified WLtoys 284161 (with ezrun 2030 brushless motor), so I bought mini-z buggy rear tires ( https://www.miniz-boutique.fr/pneus/pneus-miniz-buggy/pneus-arriere-type-z-20-mini-buggy.html) and inserts (…
This model is compatible with the lego system.
Hub for two pololu tyres to be mounted on a standard 3mm D shaft. I use these with N10's and a drop of superglue to hold them on with pretty good results. I have a 1.5MOD gear drive version which should be uploaded soon but still needs…
The two white O-rings got lost on this kids toy so I made some beefier TPU tyres as well as an inner ring for the friction wheel for the carousel itself. Print the "Reifen"-File 2 times and the Ring file 1x. Category: Toy & Game Accessories
Print on TPU (I used smart materials flex 93A) Layer: 0,15 mm. Top and bottom: 1,2 mm. 3 perimeters Lightning infill 15% (cura)
This model is compatible with the lego system.
A model of F1 Pirelli P Zero tyre for years 2022-2025 I would recommend splitting the tyre into half, printing half separately and then put them back together.
This model is compatible with the lego system.
This model is compatible with the lego system.
Print with TPU, a whole heap of walls (i tried 7) and top and bottom layers (see pic of slicer) and 55% infill. TPU likes to be printed fast so up the volumetric flow rate to a minimum of 10mm3 (if running a direct drive ender 3 for…
There are many reasons you may need, or want to deflate a tyre. This little gadget will deflate a tyre without causing any damage to the vehicle. It is a disposable tyre deflator cap. Just unscrew the valve cap and screw this on. Using…
Same electrics needed as the Original Model. Hardware changed: Needed Screws: 2× M1.6 6mm screw instead of the 10mm For Lid and Bearing guide 6× M3 8mm countersunk screws For attaching the Motorhousing to the body 4× M3 10-12mm…
This model is compatible with the lego system.
Wheel hub for 30mm Ranglebox tyres . Compliant, designed to be printed out of TPU, I use the same hub with a gear fitting on my competitive Antweights (150g). Since moving to these we've had significantly less motor failures due to the…
Die Tyreboy-Basis für den Lenker kann mit Kabelbindern fixiert werden. Anschließend wird der Tyreboy mittels Klettband befestigt. V2 use Support and Supportblocker for the Cable ties. The Tyreboy base for the handlebar can be secured with…
If you found this, you probably know what this is! Designed to be printed in 95A TPU so you can stretch the tyre over the lip of the wheel. I recommend printing with .2mm layer height and 4 layers top and bottom. I use a .6 nozzle and do…
This is an AI designed scientifically based funnel design with natural tendency to create a vortex in the liquid. The vortex naturally leaves a central air cavity for air outflow. The smooth shapes curves ensure laminar flow under all…
Printed on Bambu A1 with tree supports (way easier to cleanup in the bins).
Introduction A tire lever is a small tool used to remove a (bicycle)tire from the rim. Mostly two or three levers are used to remove a tire more easily. It makes removing tight or stubborn tires much easier without damaging the rim.…
A wider rear wheel tyre for McLaren MCL60 from LEGO SPEED CHAMPIONS SET Best printing: Cut in half, then glue together Optimal for 0.2mm nozzle!
This Dinky Toys model came back to me when my mother moved to the nursing home. As it was heavily used by my younger brothers, I had to do some cleaning. Unfortunately the tyres were missing. So I designed and printed the tyres with black…
English available below Um die Position der Sommer-/Winterreifen auf dem Auto für die Zeit des Einlagerns zu markieren, einfach die Ventilkappe abschrauben, das passende Schild aufstecken und Kappe wieder aufschrauben. To mark the…
Are you passionate about keeping your wheels clean and protected? This functional yet straightforward rotating stand is designed to help you clean, polish, and coat your wheels easily, all from the comfort of your garage. 🔄 What Is It?…
Gardena connector to tyre valve adapter, I used the ring seal of an original adapter but you can also print one with TPU (file included). Perfect to blow the water out of garden hoses or tubes before the winter with a compressor. Update…
It is a F1 Car tyre based on some sort of Pirelli tyre. Print Settings Printer Brand: Creality Printer: Ender-3 V3 SE **Rafts:** Doesn't Matter Supports: Yes **Resolution:** 0.2 Infill: 10%-20% Category: 3D Printing
It's a tyre I adapted for a 608 bearing to a nicer look. It can be printed using any filament but best rendering with TPU.
A remix of Sascha4532's excellent r600 wheel, split into two parts to allow for re-printing of the tyre as and when it wears out. The main wheel body can be printed in PETG or PLA, and the tyre was printed in TPU. You can use m5 bolts to…
This is a custom phone backplate CMF Phone 2 Pro inspired by car tire tread patterns, specially designed for the rugged-style AD09 case. Perfect for motorsport fans or anyone who loves industrial-style design. 🔧 Designed for easy…
Simple tyre tread gauge and trolley token. Dimensions are that of a UK £1 coin. UK legal limit is 1.6mm (car) but it is often recommended to replace tyres when they are at 3mm. Quick simple keyring check.
A simple puck-shaped stay for holding a tyre iron in place in the trunk of a car. Designed for using five 20mm diameter Velcro pads. There are also small indentations on the sides, so a bungee cord, etc., can be used to secure tyre iron…
Remix from orginal just easier for printing because flat part on bottom of plate. Print without supports.
I Designed some TPU Tyres for the great SMARS Robot by tristomietitoredeituit ( https://www.thingiverse.com/thing:2662828 ). Just Snap in your printed Rims into this. The Holes in the Tyre Fits perfectly. Print Settings Printer: AM8…
Warning Only 5/6 tread types have been tested by a print ; but I am confidant for the most of the other ones. Printing According your project (weight) and your TPU filament type (98A, 95A, …) chose a classic tyre or a reinforced one (with…
Warning Only 5/6 tread types have been tested by a print ; but I am confidant for the most of the other ones. Printing According your project (weight) and your TPU filament type (98A, 95A, …) chose a classic tyre or a reinforced one (with…
Warning Only 5/6 tread types have been tested by a print ; but I am confidant for the most of the other ones. Printing According your project (weight) and your TPU filament type (98A, 95A, …) chose a classic tyre or a reinforced one (with…
Warning Only 5/6 tread types have been tested by a print ; but I am confidant for the most of the other ones. Printing According your project (weight) and your TPU filament type (98A, 95A, …) chose a classic tyre or a reinforced one (with…
Warning Only 5/6 tread types have been tested by a print ; but I am confidant for the most of the other ones. Printing According your project (weight) and your TPU filament type (98A, 95A, …) chose a classic tyre or a reinforced one (with…
Warning Only 5/6 tread types have been tested by a print ; but I am confidant for the most of the other ones. Printing According your project (weight) and your TPU filament type (98A, 95A, …) chose a classic tyre or a reinforced one (with…
