bike tyre/tire lever
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.33 – €0.40 net (excluding VAT)
For file: lever massive_0.4n_0.2mm_PETG_COREONE_16m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.36 excluding VAT (range midpoint).
- Weight reported by the author
- 7 g
- Print time reported by the author
- 16.2 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
handy tool for (re)placing a bicycle tire or inner tube
- Rating
- 0 / 5
- Likes
- 22
- Downloads
- 203
- Makes
- 1
- Views
- 562
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- GNU General Public License v3.0
Introduction
A tire lever is a small tool used to remove a (bicycle)tire from the rim. Mostly two or three levers are used to remove a tire more easily. It makes removing tight or stubborn tires much easier without damaging the rim. Cyclists use it during flat repairs or tire replacements.
Models
There are 3 models, the only difference between these models is that the filling in the middle is hexagon, grid-only or massive. Each model just has a different design with different print time or filament usage.
Printing instructions
I recommend printing in PETG with 30% infill for extra mechanical resistance. No support is required, only for the grid-only model is a little support needed.
Print files
All G-codes have these settings:
- filament: Prusament PETG
- layer height: 0,2mm (speed)
- infill: 30%
- perimeters: 2
- fill patern: grid