bike tyre/tire lever
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
handy tool for (re)placing a bicycle tire or inner tube
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 203
- Wydruki
- 1
- Wyświetlenia
- 562
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- GNU General Public License v3.0
Introduction
A tire lever is a small tool used to remove a (bicycle)tire from the rim. Mostly two or three levers are used to remove a tire more easily. It makes removing tight or stubborn tires much easier without damaging the rim. Cyclists use it during flat repairs or tire replacements.
Models
There are 3 models, the only difference between these models is that the filling in the middle is hexagon, grid-only or massive. Each model just has a different design with different print time or filament usage.
Printing instructions
I recommend printing in PETG with 30% infill for extra mechanical resistance. No support is required, only for the grid-only model is a little support needed.
Print files
All G-codes have these settings:
- filament: Prusament PETG
- layer height: 0,2mm (speed)
- infill: 30%
- perimeters: 2
- fill patern: grid