Lego Head Tyre Valve Cap for Car/Bike Schrader
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A lego-style head and helmet designed as a car/motorcycle/bicycle valve cap.
- Rating
- 0 / 5
- Likes
- 26
- Downloads
- 152
- Makes
- 0
- Views
- 1,165
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
A lego-style head and helmet designed as a car/motorcycle/bicycle valve cap. This is oversized so about twice the size of genuine lego minifigure parts.
Print Settings
Printer Brand:
Creality
Printer:
Ender 5
Supports:
Doesn't Matter
Resolution:
0.2mm
Infill:
20%
Filament:
Yellow
Notes:
This will print better/faster with very thick walls (8 is good). The overhang above the face piece of the helmet will print adequately without supports.
eSun yellow is a good match to yellow lego.
Tinmorry Red or Royal Blue look good for helmets
Post-Printing
You might need to snip off some stray filament if you print the helmet without support.
The head will push firmly into the helmet without glue. It's a tight fit but not difficult. The base of the helmet is slightly rounded and the head is cone-topped to make this easier. The tabbed side forces alignment.
The final diameter of the cap is almost 20mm, so some wheel trims might interfere with this.
How I Designed This
I've scaled up a lego minifigure helmet and modified the interior to be a simpler cone-topped cavity with a tab on one side, to prevent the head from rotating.
The head is a simple cylinder with a cone top, and a hollow centre to approximate a valve stem diameter. The head would not look correct without the helmet.
7th Mar 2024 - Uploaded a new Head "v6" part with threaded inner hole. This might fit your valve stem more easily. It's compatible with the existing Helmet "v5" part.
Category: Automotive