Tarmo5 Wheel and Tyre Set
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Set of printable wheels and tyres for the Tarmo5 RC car by Engineering Nonsense
- Rating
- 5 / 5
- Likes
- 17
- Downloads
- 196
- Makes
- 1
- Views
- 933
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I created a set of wheels and tyres, as I couldn't find any locally that would fit.
Wheels have the hexagon shape indented for the drive shaft of the Tarmo5 with a 4.5mm hole to take the 4mm screw easily. I had to use a 1mm shim on the edge of the drive shaft to get this to fit nicely.
Wheels are in 2 sizes
- Front being 77mm diameter, 28mm wide. Takes the 26mm wide tyre
- Rear being 77mm diameter, 43mm wide. Takes the 41mm wide tyre
There is a 2mm lip on the outer edge of the wheel to stop tyre sliding off
Wheels printed in PLA and PETG, I found the PETG more forgiving. I used 30% infill for the spokes/hub area to ensure optimal strength to weight
Tyres printed in TPU with 10% infill to allow a bit of spring. Spikes added to tyre to give better grip. I did test with a standard tread but found these spikes did the job best. Please note, they will mark a wood floor so don't destroy your hallway flooring with this!
All designed to print without any supports