Counting matching models…
Here is my design of the fume extractor for the Creality Falcon 2 laser engraver/cutter (22W laser). For the laser I used standard 12 mm laser module with crosshairs lens. It is designed to allow for a good airflow and prevents…
The original Mercedes Star on my kids' tractor disintegrated, so I created a replacement one. This is for the Rolly Toys FarmTrac MB 1500 / MB-trac.
This is the full documentation for building a tractor with the PolyBriX construction kit. This project only provides the STLs with all the required parts and the detailed assembly instructions. The individual parts can be downloaded form…
This housing holds sets of magnets in positions that generate an equilibrium of forces where the magnets remain close, but do not touch. The 6 holes at 60 degree separation holds four 6 mm diameter, 2 mm thick rare-earth magnets. The…
A small tool to remove the AAAA-Battery of a Surface pen. If the pen has any dents or the battery inflated a bit this might help. Compatible pens It fits surface V4 pens which are the standard pen for: Surface Pro 3 to 7+ Surface Book 1…
This model was made to design a mechanism to control the steering wheel using Ag Open GPS
Quick and simple sandwich construction for fume extractor using 140mm fan. Needed something to suck fumes away from my face while soldering and didn't like other over engineered designs that uses a lot of plastic and unnecessary…
Heavy-Duty mount for the Yellow Jacket 3 outlet 12 gauge “contractor” extension cord. May fit other similar designs. It accommodates #8 wood screws, including cabinet/washer head screws. Printed in PETG. Model is designed to print with…
K-cup extractor with built in mason jar wide mouth lid. Prints without supports.
Update 3/3/26: These retractors last around a 1000hrs of print time before the winding mechanism fails. The stock piano wire broke at the extruder, so I needed something to hold the umbilical up and out of the belts / print. Simple…
John Deere 3020 Tractor - 1:8th Scale Uses M2, and M4 Screws Certain holes will need drilled. Indents on parts show drill locations 0.25in x 11in (6.4mm x 280mm) rod used for rear axle M2 rod used for steering wheel A single M1x6mm screw…
Extractor for a PF41 BB when you want to carefully remove the cup. Does need a cup larger than the bearing itself to pull the bearing into and a long screw. ( I used a Park Tool Crown Race Setting adapter but you just need a big enough…
Googly eyes not included. This is a redesign of my previous fume extractor, made to be a bit sleeker on the outside and to have the exhaust come out of the side instead of the front for easier use. I also added a foot for stability, and…
this model holds bushing for tractor cat1 attachments if you have cat2 tractor, and it has two holes for holding pins wh
this uses a 40x40 fan and a 60x40 perf board when making the circuit you'll want to put the "power input" on the top right of the board. this system also works with a 3 pin dupoint connection this should be placed at the top left of the…
This is a draft version. Nothing moves. I’ll be working on more advanced models with multiple parts, less supports, and moving pieces, hopefully soon. this was printed on elegoo centauri carbon, as oriented, at .2LH with sunlu pla 2.0+…
an updated john Deere styled hood for openrc tractor mk3 from wekeas original version (https://www.myminifactory.com/)
The detachable ribs are expected to be removed after printing. * Printed in PLA * No brim * No generated support
A set of files in both metric and imperial consisting of various lengths of ruler, protractor and set squares The 45cm (18 inch) and 1m (39 inch) rulers are cut to allow printing on average size beds The OpenScad file allows you to make…
I love truck & tractor pulls, hence why I made this model. Assembly instructions are in a PDF. I used 1.8mm brass rod for the axles. Tires can be optionally TPU. If there's any problems, let me know! I wanna make this as easy to…
The buttons of our Novy extractor hood got stuck and were unusable. The intermediate plastic part linking the button to the actual PCB button broke / wore down. This piece replaces the intermediate part. Print 1 for each button.
It's an adjustable soldering fume extractor. It incorporates a tray for using a carbon filter to filter the fumes before extracting them. It should work with any 120 x 120mm fan, and it has been modeled to use: this switch:…
used 120 mm pc fan(s), an old power supply, and a toggle switch to go with frame. Power supply definitely overkill, but I had it laying around and it was easy to plug everything into it. The only thing I purchased were the filters. These…
A detailed 3D printed model of the legendary Belarus MTZ tractor — a symbol of strength and reliability. Perfect as a nostalgic collectible, a unique gift for tractor lovers, or a rustic piece of farm-style décor. Ideal for 3D printing…
Original model of a stereotaxic rig protractor extension for juvenile songbird surgery. This extension, perfect for veterinarian working on passerines, fits perfectly the standard ear bar of a stereotaxic rig and increase the precision of…
Keep smoke and odors moving out the window so your lenses stay cleaner and your engraves stay crisp. This compact, high-flow extractor is designed for flat or low-profile projects and mounts to most standard laser beds. What you get 3MF…
printed in PETG 3 walls myself. clicks over and onto the existing loader front
Uses a Noctua fan and carbon filter to remove solder fumes and vapors.
Search and explore through any rough wilderness and terrain with WALL-E modded for 4x4 propulsion. The toy resembles a truck or tractor with puffy wheels. Two options for the wheels either smooth or treaded-look, both look cute. Printing…
1x5x1.5 Gridfinity Holder for 6" digital protractor, opening is 180mm x 36.767mm. Print is designed to be paused on last few layers to change to a contrasting color for outline and label.
This is a small fume extractor for my bench. Mostly used to remove fumes while soldering electronics. It uses an easily available 1/4" carbon foam filter cut to size. The fan is a 40mm x 40mm x 28mm 12v computer fan. I used a USB-C…
This is designed to securely grip an 80mm extractor hose onto a 70mm diameter tube. Effectively doing the job of a jubilee clip (though not adjustable) Directions Slot the TubeLock onto the hose (with the thicker grip facing away from the…
ORC Tractor Mk 2.4 Ford 4400 Industrial mod. Alternative version of the Ford 4000. Filament used Deeplee Sky Blue & Elegoo Sunshine yellow PLA. Layer height 0.16 (0.12 for grille, badging & exhaust). Assembly as per original 2.4 tractor.
This is a extractor setup for a 120mm fan, I use a 3000rpm Noctua, and 120mm Zortrax HEPA + Activated Carbon filters. It is made up off three parts, the filter housing, a funnel piece and a fan housing. It is designed to fit an Ikea…
Idea The Extractor - a special tool for the removal of small objects from pipes, slits or else. Specially made to easily extract and remove broken nocks from arrows. Just put in some screw (wood screws might work best) that fits your…
For 120 mm fan and 10 mm active coal filter. The filter provides the pressure to keep the two parts together. Printed in PETG Carbon.
Your all-in-one holder for organisation and quick access to replacement nocks including helpful tools. Everything you need together in one system. Easy accessible - everytime. This companion is perfect for: Easy storage Quick access…
I printed this nice fume extractor but wanted my fan to be more solidly held in place than by the two side clips. This is a trivial internal plate that sits inside an existing rim in @dr.dentz' model and allows a 120 mm fan to be screwed…
My Lincoln Electric Miniflex Fume extractor didn't come with a nozzle for it and it's stupid expensive. Rather than fork over the cash, I decided to model this thing up. It works well but definitely print it out of something FR (flame…
using a standard 4-inch vent hose, keeping your shop air clean and your laser optics clearer during engraving and marking jobs. Optimized for engravers using standard fiber laser beds, this low-profile extractor is ideal for coin…
My default knobs broke after couple of years of use, plus they were smooth and hard to grab and rotate. New ones are much easier to grab and rotate and look good. Based on your printer settings – you might need to adjust hole size. Before…
I have been working with SMD parts under a microscope for quite some time, and have always used my big and bulky hakko fume extractor. While it works, it is very loud and takes up my precious desk space. I have looked up to see if…
RC model of articulated heavy tractor-truck with single/dual wheel setup and functional rear suspension of accessories Dimensions: Length = 700 mm Width = 268 mm-Single setup, 330 mm-Dual setup Height = 380 mm Weight = cca 4 kg Filaments…
On AliExpress, I found these useful tools designed to extract motor gears from RC models and power tools. However, I didn’t like that they were delivered loose in a plastic bag, so I designed a proper storage solution based on the rugged…
Connect the Dewalt DWE 74xx series table saw dust outlet to standard 32mm ID hose, readily available to buy online. The Dewalt saw comes with an adapter which connects to a much larger hose, this is fine if you buy into the Dewalt…
Here are three remixed parts for the famous heavy duty solder fume extractor
This is a mod for the KOTTO fume extractor. Required parts: KOTTO Fume extractor 120mm X 120mm X 38mm, DC fan. I used the SUNON MEC0381V1-000U-A99, which is a high speed 12VDC affordable fan (6.70 CHF or ~7EUR on conrad.ch ) USB-C Trigger…
A more space-efficient twin-hose Y adapter for Festool dust extractors with hoses facing to the front. Can take the Festool slide blast gates and after-market 2.25" / 63 mm options as well. Print with the twin hoses down on the print bed,…
A unique 3D printable creation — this Turntable Cartridge Alignment Protractor Gauge, Overhang Adjustment, Setup Tool Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - Print…
If using openGrid, print 2x of the openConnect snaps. (Doesn't have to be the ones included, any of the openConnect snaps should work) If using DDD Wall Control, print 4 of the pins and 1 of everything else. The iFJF protractor is a…
This model use the Skadis universal peg standard by KimJanosch You will need x1 universal peg found here Yes, the model is made to be friction heavy on the peg, design with low friction on the peg have a tendancy to unclip if the tool…
I use an inline duct fan to vent the fumes out the window in my basement. The boom arm allows me to position the extractor very precisely. Mic Stand Inline Duct Fan Vent Hose
Tool for installing and removing BNC cables on high density panels. Changes from original: Reduced length from 130mm to 80mm Adjusted profile to fit around right-angled BNC plugs Print in PLA or PETG. Use a generous brim. Supports…
Basic riding lawn mower/garden tractor (Ho scale 1:87)
This hybrid upgrade for the Anycubic Kobra S1 Combo is a must-have for printing technical filaments like ABS or ASA. It extracts toxic fumes (VOCs) directly at the source while keeping the printer's purge functionality fully operational.…
This is a protractor model designed to be easy and quick to produce, for printing a 180 degree protractor design to using the eufyMake E1 UV printer. Please see the eufyMake project to print the protractor on the top of the design direct…
Simple fume extractor with 12v 4020 fan. Hardware: - Boost DC-DC 3,7V - 12V module - Usb-C connector - 4020 12v Fan - Switch button
Turn an old PC fan into an solder fume extractor with these 3D printed parts. They screw directly onto the fan, creating a compact and effective solution for removing solder smoke. Easy to assemble and ideal for hobby electronics and…
As I didn't find a DIY solder fume extractor that I liked and trusted to work, I build myself one. For details see the video I made about it:
This is a replacement seat bracket compatible with Ryobi 42" 80v riding mowers. I've not had a chance to test it beyond sitting on it and trashing around. I'll report back after a mowing season. The print quality doesn't look great…
Need a pause to add the M3 nut into the knob model. I didn't measure what line this pause needs to be at. The void is large enough that I just watched it, and put the nut in when it had enough clearance. There's more room than there needs…
I designed a taller and wider front wheel, along with a taller rear wheel with more teeth, for the self-driving sprinkler tractor. These changes were made for two main reasons. First, the original design could sometimes get stuck in the…
protractor holder for the Ikea Skadis system. Works with 1-2 protractor. Print it upside down with support at the arms
Two RC models of agricultural machinery in ONE SET! Dimensions: Total length = 1250mm Width = 325mm Height = 385 mm Weight = cca 8 kg Filaments consumption: 6,8kg PLA + alternatively 0,1kg PC Blend for gears 1,2kg TPU 90A 0,1kg PETG Print…
First iteration of dust extractor cover for Tercoo Double disc. Single variant should also fit, triple variant might also fit. Next iteration needs a bit more stiffness. https://www.tercoo.com/ Two halves joined with 4 pcs m3x40 bolts and…
Short blades for the Wixey WR41 digital protractor. Uses the original fasteners, simply uninstall the factory plastic rules and install these in their place. Makes for a very compact and handy direct angle measuring solution. I printed…
Adjusted original model to use Adafruit's HUSB238 USB-PD and a different filter type. Removed switch...makes in more minimalist 🙂 The fan guard is a PrusaSlicer merging of the original model's fan plate and Noctua's fan grill. Printed in…
A compact, portable fume extractor in a 1x1x6 Gridfinity form factor. Ideal for storing in Gridfinity tool boxes. Components Filter (e.g. Hakko A1001 - cut to size) 4010 fan (e.g. Sunon EE40101S1-1000U-999) USB PD module (e.g. AITRIP…
A replacement for the original plastic cover next to the seat of tractors of the Fiatagri 94 series. Originally created for the Fiatagri 88-94. Should fit for at least all tractors of the series. The part is symmetric and fits both sides.…
Made to fit the Rutlands Router Table dust port, down to 36.5mm outer diameter of the small end to fit my standard dust extractor hose
A product designed and developed by one of South Africa's top Industrial Designers - Theonette Mostert.
Extoil hasn't had ("sold out") caps available for their oil extractors due to “unexpected demand” and doesn't seem to be getting anymore in. I designed a rudimentary plug to fill the top opening on their oil extractor to meet my needs.…
Tractor Big Bud 600/50 designed based on pictures and dimensions found on the Internet. Thank you to Welker Farms Youtube channel for the videos of the tractor restoration that helped me for this design. Model need 4x ball bearing 10x22x8…
Build the ultimate DIY soldering fume extractor from an old 120mm PC fan. This all-in-one design included a DC power forwarding hub, detachable magnetic hood, voltage display and easy access carbon filter bay. The fume extractor includes…
Caps for the JRready microfit removal tools https://www.amazon.com/gp/product/B0C4PTWP8G/ref=ppx_yo_dt_b_search_asin_title
I was getting tired of my old router spraying all the dust in my workshop, that's why i designed this dust extractor. It's directly bolted to the baseplate of the router. The OD of the hose connection is 35 mm and fits my rubber adapter…
Make your already-XLent EnXLosure for your Prusa XL even more XLent! Add fume extraction and ventilation with this remixed Back Top Panel by moi, Upton O'Goode, featuring a port that fits standard 4 inch flexible “dryer” duct. Some…
Make your own smoke extractor, very useful for the electronician ! Last version : https://github.com/hugokernel/OpenSCAD\_Things/tree/master/ActiveCarbonExtractor Article en français sur mon blog :…
I decided to combine a solder fume extractor with attachable helping hands. I have two slots for mini rocker switches since I also included a custom LED light. I am powering this with a 12v 5amp DC power supply. Designed this around a…
Transparent 180 degree 0 to 15 centimetre Type: Protractor Size: 150 x 92 x 1.50mm
You are doing me a big favor by clicking the Like button :-) I use a silent two speed fan Print without support Shopping list: 1 x 3 mm red led + resistor 5.6k of stepdown converter 12 to 2 volt 1 x Microswitch 15 x 10 mm 1 x switch 8 mm…
Big Bud 700 (built 2023-2024) scale 1/32. This model is the reduced scale from the 1/16 Big Bud 700. The model has then been reworked to be easily assembled and to have enough frame thickness. The wheels and tires can be either dual…
3D Part for cover the basket sensor on AL-KO Garden Tractors, for mowing grass without basket
A slow-roll fish attractor for trolling, works like a triangle flasher. Use wire or heavy fishing line and add beads. You can paint it, add 3D eyes, and lure tape. Scale it and make it in different sizes. Also rotates in the wind as an…
In my model I used an old 9 volt motor of 26 mm diameter but feel free to change the diameter of the motor mount hole via the fusion 360 file to adapt this model to your needs. Additionally, 3 M3x35 mm screws and 3 M3 screw thread inserts…
Fan used in this project is NF-A6x25 PWM Fan is mounted using self taping screws from the Noctua package And you would need 8 or 10 (if with clip) M3 screws to screw the whole box :)
A simple model for assembling an activated carbon filter to an 80 mm fan to filter out soldering fumes.
I was not able to print the fume extractor adapter I designed on my 220x220 printer so split into 3 parts. Juuuuust fits on build plate. Doesn't need glue, but it couldn't hurt either. For 4" vent hose. Printed in PETG 15% gyroid infill 3…
1:16 Scale of a Big Bud HN-350 Uses M4 & M2 Screws Uses Chunky Tires and Rims (See other models from us) Engine and Front Grill recommended to be resin printed
This is a holder for Ikea Skadis pegboards to hold a digital angle finder, aka. protractor. You slide in the tool from the top right, so you need some place on the board right to this piece. I printed it with 0.3mm layer height without…
Lötabsaugung US38 Deine perfekte Lösung für eine selbstgedruckte Lötabsaugung! Nachdem ich mit den bestehenden Designs für selbstgedruckte Lötabsaugungen nicht zufrieden war, habe ich meine eigene Lösung entwickelt – speziell auf die…
You need to squeeze 250mm x ~62mm x 10m of activated carbon foam in the round area. And ~65mm diameter and 10mm thick circle for end of the filter part
