Watch vise jaws for Harbor Freight Central Machinery Vacuum vise
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Turn your 2-3/4 in. Articulated Vacuum Vise from Harbor Freight into a watch vise
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 4
- Makes
- 0
- Views
- 80
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print with the hex shaped pegs flat on the bed for strength and use at least 3 perimeters.
I used ASA, but PETG will probably work, don't recommend PLA.
The screw holes will likely need to be drilled out to fit properly.
To assemble:
open the jaws completely and remove the moving jaw.
remove the rubber jaw covers and unscrew the metal jaws.
replace the metal jaws with the watch vise jaws and secure with the screws that held the metal jaws in place.
replace the moving jaw in the vise, and use to secure your watch while you work on it!
Notes:
I've included the freecad drawing in case some one wants to use this model for some other use.
The hex pegs in this drawing are 30mm apart.