Jaw Inserts for bench vice[vise] (universal version)
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.83 – €2.24 net (excluding VAT)
For file: js_sverak_pos-003-3_celvloz_f-lr_uni_02mm_petg_.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.04 excluding VAT (range midpoint).
- Weight reported by the author
- 29 g
- Print time reported by the author
- 1.96 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Jaw Inserts for bench vice (universal version) When I designed and created jaw inserts type for bench vice YORK 80…
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 167
- Makes
- 0
- Views
- 2,677
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Jaw Inserts for bench vice (universal version)
When I designed and created jaw inserts type for bench vice YORK 80 ("https://www.prusaprinters.org/prints/2449-jaw-inserts-for-bench-vicevise-york-80")
so I designed and created universal version not dependent of vice producer:
•C (centering) size 1 UNI
•C (centering) size 2 UNI
•F (flat) UNI
•S (special for screw ISO4762) UNI
•you can use different combination of inserts type as you need
(for example instead standard C-L + C-R you combinate C-L + F, C-L + C-L)
printed parts, material PETG:
[layer height=0,2mm][Infill=100% Rectilinear][vertical shells perimeters=3]
Pos-001_Jaw Insert C-L_UNI (size1)
Pos-002_Jaw Insert C-R_UNI (size1)
Pos-001_Jaw Insert C-L_v2_UNI (size2)
Pos-002_Jaw Insert C-R_v2_UNI (size2)
Pos-003_Jaw Insert F_UNI
Pos-004_Jaw Insert S-L_UNI
Pos-005_Jaw Insert S-R_UNI
Print instructions
Slic3r Prusa Edition settings:
0,20mm QUALITY MK3
Prusament PETG
Original Prusa i3 MK3S
layer height = 0.2mm
vertical shells perimeters = 3
Infill=100% Rectilinear
printing time:
2h 07min [Pos-001-2_C-LR_UNI]
2h 44min [Pos-001-2_C-LR_v2_UNI]
1h 57min [Pos-003-3_F-LR_UNI]
2h 53min [Pos-004-5_S-LR_UNI]