Jaw Inserts for bench vice[vise] (universal version)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Jaw Inserts for bench vice (universal version) When I designed and created jaw inserts type for bench vice YORK 80…
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 167
- Wydruki
- 0
- Wyświetlenia
- 2677
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Jaw Inserts for bench vice (universal version)
When I designed and created jaw inserts type for bench vice YORK 80 ("https://www.prusaprinters.org/prints/2449-jaw-inserts-for-bench-vicevise-york-80")
so I designed and created universal version not dependent of vice producer:
•C (centering) size 1 UNI
•C (centering) size 2 UNI
•F (flat) UNI
•S (special for screw ISO4762) UNI
•you can use different combination of inserts type as you need
(for example instead standard C-L + C-R you combinate C-L + F, C-L + C-L)
printed parts, material PETG:
[layer height=0,2mm][Infill=100% Rectilinear][vertical shells perimeters=3]
Pos-001_Jaw Insert C-L_UNI (size1)
Pos-002_Jaw Insert C-R_UNI (size1)
Pos-001_Jaw Insert C-L_v2_UNI (size2)
Pos-002_Jaw Insert C-R_v2_UNI (size2)
Pos-003_Jaw Insert F_UNI
Pos-004_Jaw Insert S-L_UNI
Pos-005_Jaw Insert S-R_UNI
Print instructions
Slic3r Prusa Edition settings:
0,20mm QUALITY MK3
Prusament PETG
Original Prusa i3 MK3S
layer height = 0.2mm
vertical shells perimeters = 3
Infill=100% Rectilinear
printing time:
2h 07min [Pos-001-2_C-LR_UNI]
2h 44min [Pos-001-2_C-LR_v2_UNI]
1h 57min [Pos-003-3_F-LR_UNI]
2h 53min [Pos-004-5_S-LR_UNI]