Couch Armrest Stand with Cup Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It’s a 3D-printable couch armrest stand/tray that slides over a couch armrest.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 82
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution — Noncommercial
It’s a 3D-printable couch armrest stand/tray that slides over a couch armrest.
The design has:
A 295 mm long top shelf that sits flat on top of the armrest.
A 145 mm wide opening underneath so it fits snugly over your couch armrest.
Two side walls/legs that hang down the sides of the armrest, about 70 mm minimum, to keep it stable.
A 5 mm raised lip around the entire top shelf on all four sides so remotes, phones, snacks, etc. do not slide off.
A cup holder on top, positioned close to the shelf edge while still centered across the width.
A lower inside pocket/shelf attached to one side.
That pocket sits below the main shelf, with the top edge 15 mm below the main shelf and the bottom/floor 45 mm below the main shelf, making it a deeper recessed storage area.
The pocket walls are the same height all the way around.