Couch Armrest Stand with Cup Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
It’s a 3D-printable couch armrest stand/tray that slides over a couch armrest.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 15
- Makes
- 0
- Views
- 82
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Living Room
- License
- Creative Commons — Attribution — Noncommercial
It’s a 3D-printable couch armrest stand/tray that slides over a couch armrest.
The design has:
A 295 mm long top shelf that sits flat on top of the armrest.
A 145 mm wide opening underneath so it fits snugly over your couch armrest.
Two side walls/legs that hang down the sides of the armrest, about 70 mm minimum, to keep it stable.
A 5 mm raised lip around the entire top shelf on all four sides so remotes, phones, snacks, etc. do not slide off.
A cup holder on top, positioned close to the shelf edge while still centered across the width.
A lower inside pocket/shelf attached to one side.
That pocket sits below the main shelf, with the top edge 15 mm below the main shelf and the bottom/floor 45 mm below the main shelf, making it a deeper recessed storage area.
The pocket walls are the same height all the way around.