MX-5 Miata ND Front Mud Flap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Front mud flaps for an ND MX-5 / Miata.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 51
- Wydruki
- 0
- Wyświetlenia
- 269
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
I wanted some mud flaps for my ND2 MX-5 and Mazda wanted $300 for an unpainted pair.
Where there's a will (spite), there's a way (3D printer + Fusion360).
These use the existing three push clips in the wheel well. Just use a flathead screwdriver to pop the centre of them out, then put the mudflap in front of the wheel well plastic.
That is, the ordering should look like: body, wheel well plastic, mudflap, plastic push clips, wheel. There's enough play in the plastic clips to let this fit in there snugly.
Should be printed in PETG, though I did run PLA ones for a while and they were fine.