Symmetric BFI 30mm Pin Mod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I only had 30mm pins lying around so whipped this up for jimmyjon711's symmetric mini BFI pin mod.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 49
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Description
Symmetric Mini BFI 18mm Pin Mod.
I had no 18mm pins lying around and don't really like using bolts for my idlers so took jimmyjon711's mod and made it work for 30mm pins
ABOUT THE DESIGN...
Just a simple, supportless mod to allow for the use of 18mm pins in the symmetric mini Beefy Front Idlers for the Voron 2.4 r2
PRINT SETTINGS
Filament: ABS
Temp: 265c
Perimeters: 4
Infill: 40%
Supports: No
Raft: No
Brim: No
Layer Height: 0.2mm
Nozzle: 0.4mm
I didn't need to rescale this as it has been designed with shrinkage in mind - the fit for the pins is very snug - pressure will be needed to fit them.
SUMMARY
Quick and easy, and with a properly setup printer - no supports needed, I have no idea why they're included on the original 18mm mod.