Symmetric BFI 30mm Pin Mod
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I only had 30mm pins lying around so whipped this up for jimmyjon711's symmetric mini BFI pin mod.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 2
- Makes
- 0
- Views
- 49
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
Description
Symmetric Mini BFI 18mm Pin Mod.
I had no 18mm pins lying around and don't really like using bolts for my idlers so took jimmyjon711's mod and made it work for 30mm pins
ABOUT THE DESIGN...
Just a simple, supportless mod to allow for the use of 18mm pins in the symmetric mini Beefy Front Idlers for the Voron 2.4 r2
PRINT SETTINGS
Filament: ABS
Temp: 265c
Perimeters: 4
Infill: 40%
Supports: No
Raft: No
Brim: No
Layer Height: 0.2mm
Nozzle: 0.4mm
I didn't need to rescale this as it has been designed with shrinkage in mind - the fit for the pins is very snug - pressure will be needed to fit them.
SUMMARY
Quick and easy, and with a properly setup printer - no supports needed, I have no idea why they're included on the original 18mm mod.