Gridfinity cradle for Bosch HT14 style staple guns
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gridfinity 4x3 cradle for Bosch HT14-style staple gun with integrated staple storage.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 64
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
This Gridfinity 4x3 cradle is designed to store a staple gun based on the widely used Bosch HT14 form factor.
The tool rests securely in a custom-shaped horizontal pocket, providing a clean and organized storage solution within your Gridfinity system. Thanks to the standardized shape, this holder is also compatible with many generic staple guns modeled after the HT14 design.
An integrated staple storage compartment keeps refills close at hand, making this a compact and practical addition to any workshop setup.
💡 Design Features
Designed around the Bosch HT14 form factor
Compatible with many HT14-style generic staple guns
Horizontal drop-in fit for stability and easy access
Clearance for tension adjustment knob (~20 mm diameter)
Integrated staple storage pocket
Gridfinity 4x3 footprint
Fully print-and-use, no hardware required
🛠 Printing & Materials
Material: PLA recommended
Layer height: 0.2 mm
Infill: 15–20% (or use lightning infill with about 10%)
Supports: typically not required
No assembly needed — just print and place it in your Gridfinity setup.