INBXX mod - Magnetic Service Hatch
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
With this mod the service hatch is closed with magnets, so you can open it with one hand. And it closes the air gap.
- Ocena
- 4,944 / 5
- Polubienia
- 30
- Pobrania
- 121
- Wydruki
- 16
- Wyświetlenia
- 653
- Oceny
- 18
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
With this mod the service hatch is closed with magnets, so you can open it with one hand. And it closes the air gap around the service hatch.
I've used @Joakim_T's handle as a starting point (Download it, you'll need it). Add 2 magnets (5x3mm), they will attract the 2 bolts that are used to hold the handle.
Also needed, are 6 M3 nuts and bolts. (4x 8mm and 2x 10 or 12 mm). You probably can reuse some of the nuts and bolts from the original maintenance hatch plugs. (But still need 2 longer versions).
Be sure to use supports (!) The part that holds the magnets, is a large overhang. Without supports, deformation is likely and the magnets won't fit.
Update: I uploaded a different version - .3MF only specialy for 6x3 magnets.
Also a link to the plug with openings for the PTFE cables. Not necessary, but perhaps handy.
(The INBXX is a filament storage option designed by Voxel3d - The must-have for every Prusa Core One +/L owner - or every 3D printer owner for that matter. I personally like it a lot, especially because there are so many mods and things you can tinker with, to make it really your own).
Happy printing and go for the INBXX, you'll like it!