25 modeli
This is my attempt to make a traveling box / case for the BetaFPV Meteor75 Pro. Lid_V2 comes with round handles to make opening easier. Printing instructions still apply. Works with V1 box Box_V2 updated to have keying for V2 lid.…
These magnetic clips will hold a wooden or plexiglass panels in place, creating a beautiful enclosure for the Flashforge AD5X printer or any steel frame print. Supplies… 2x 12"x15"x1/8" (20x24cm) boards or 12x15" (20x24cm) plexiglass…
This is a magentic lens filter case for 49mm Filter. Customized version of https://www.thingiverse.com/thing:43781 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=43781 All credits got to:…
I designed Yoda's Lightsaber from Star Wars in Fusion 360. I would recommend for the blades that you use PETG with no cooling to make the blades as strong as possible. As for the hilt, I used some silver PLA. The pommel screws into the…
Storage for printed hex tiles in a frame. (either for the interlocking or magnetic frames) Trays snap together with 8m magnets.
Prints without support. Other components needed: 7-9,5mm steel ball, 5mm magnet. Assembly instructions: Insert the magnet into the small hole in the lid and secure it with superglue. Put the steel ball into the hole in the box. Close the…
Magnetic dovetail saw guide. The Fusion files are parametic for size and angle. There are probably lot out there but I was practicing Fusion. These are about 45mm with 15mmx2mm magnets. Just suprerglue the magents in. Category: Hand Tools
A Nespresso Pro capsule dispenser to attach on a fridge with magnets. Holds 15 capsules. The magnets are embedded in the print. You need the exact magnets and stop the print at the right height to insert the magnets. It's designed for 8mm…
This is a magnetic mount for IKEA Skadis to mount allen keys magnetically
Hello, This is my first case/ first 3d model I created. I bought a chocofi a while back and was disappointed in the cases available. I wanted something a little more of a case than a cover but keeping the height as low as possible. The…
A small magnetic key ring. Perfect for hanging your keys on a door or to hide a key out of sight. Or print 2 and stick them together! uses a 10x10x10mm magnet (mine actually measured 9.36mm cube) Print it in the orientation it comes in as…
Magentic pushpins are small and handy tools used to hold papers or notes in place on metal surfaces such as whiteboards, bulletin boards, or fridges. They come in two different sizes, each designed to accommodate different magnet sizes…
Small magnetic holder. Size is 55x55x55mm. Two main file ( small_magnetic_holder_10mm_holders ) works with magnets that are R5x2.5mm (radius of 5mm & 2.5mm thick), additional model provided for R4x2.5mm. I've found the R5x2.5mm magnets,…
A case for a SKR v1.4 (Turbo) Board and a MKS Hotbed Mos+ v1.1 Mosfet. Needs 1x 4010/4015/4020 Fan, 4x 6x1 Magnets, 8x M3x6 Screws + 8x DIN 934 M3 Nuts and 4 Screws (+Nuts) (Max. M4) for the Fan. Supports are optional if you master your…
This is an alteration of RamjetX' magnetic shifter ( https://www.thingiverse.com/thing:2919690 ). So all of the info there applies to this one here as well. I just made some slight changes to make it a better fit for my sim racing wheel (…
Remixed model from Bmorr and nFinity. Added 2cm space for tokens. Model accepts 12 5*2mm magnets press fit. Depending on your printer small dab of glue may be needed. Commander slot designed for top loader hard sleeve (although dragon…
A magnetic tic tac toe game that can be played on the fridge, or on the move, in the car, on the plane. Printed with 2 colours Suited to 6mm x 1mm magnets Category: Games
Just add two or more clips to your blue Ikea bag and use it a perfect laundry bag. The magnet clips on to the machine, while unloading, which is very convenient! The print works best with a more flexible material (e.g. PetG). The Magnet…
I have a Nebo Big Larry Pro torch, its great, the magentic base is really useful. However it isn't very stable and gets easily knocked off, as you can see from the photos it has taken a battering. This holder slips over the tube where the…
This is a simple holder for up to two laboratory tubes with a 10mm diameter and a inverted conic bottom. You can embed two magnets measuring 10mm (diameter) x 2mm (height) in order to capture ferromagnetic elements in the sample inside…
A Simple Humidity meter holder V2.0. NOW Adjustable -- you will need two bolts as an axis. Have Fun, don´t hesitate to give a like or post a make picture. Open for any improvement ideas.- just send me a message. Category: Household
I have created a simple block that can hold up to 8 drill\screw bits. Can work with the normal length and longer length ones. There are two spaces for magnets. One on the bottom, and one on the back. I have made them accept magnets up to…
This is a very simple remix of the magnetic clip that jkim_makes and the rest of the team made for the WDT tool. I had 6mm x 3mm magents laying around instead of the 5mm x 2mm ones the clip was originally designed for, so I remixed the…
Magnetic feeder for flexarium or terrarium for chamelon or other repltiles
Remixed model from Bmorr and nFinity. Added 2cm space for tokens. Model accepts 12 5*2mm magnets press fit. Depending on your printer small dab of glue may be needed. Commander slot designed for top loader hard sleeve (although dragon…
