1 / 3
Collapsing Yoda Lightsaber with Magentic Hilt Connecter — zdjęcie 1
1 / 3

Collapsing Yoda Lightsaber with Magentic Hilt Connecter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Yoda's iconic lightsaber from the Star Wars Trilogy

Ocena
0 / 5
Polubienia
16
Pobrania
113
Wydruki
0
Wyświetlenia
958
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Props
Licencja
Creative Commons — Attribution — Noncommercial

I designed Yoda's Lightsaber from Star Wars in Fusion 360. I would recommend for the blades that you use PETG with no cooling to make the blades as strong as possible. As for the hilt, I used some silver PLA. The pommel screws into the hilt. This is all printed on the Ender-3. These design feature magnets so that you can walk with a lightsaber as they do in the trilogy. You will need two magnets which have the following dimensions; 30mm x 10mm x 5mm

Print settings:

0.2 mm Layer Height

10% Infill

3 walls

3 Bottom&Top Layer

BuildPlate Support

Tagi