1 / 3
Collapsing Yoda Lightsaber with Magentic Hilt Connecter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Yoda's iconic lightsaber from the Star Wars Trilogy
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 113
- Makes
- 0
- Views
- 958
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Attribution — Noncommercial
I designed Yoda's Lightsaber from Star Wars in Fusion 360. I would recommend for the blades that you use PETG with no cooling to make the blades as strong as possible. As for the hilt, I used some silver PLA. The pommel screws into the hilt. This is all printed on the Ender-3. These design feature magnets so that you can walk with a lightsaber as they do in the trilogy. You will need two magnets which have the following dimensions; 30mm x 10mm x 5mm
Print settings:
0.2 mm Layer Height
10% Infill
3 walls
3 Bottom&Top Layer
BuildPlate Support