Nano Spary Machine K5 reservoir interface receptacle replacement part
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement part for the "Nano Spray machine" or other rebranded handheld electric water/liquid vapor sprayers.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 1
- Wyświetlenia
- 45
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
These water vapor spraying machines are great for gardening, however the part that connect the water reservoir (bottle) to the machine has a design flaw that allows you to overtighten the bottle and crack the plastic.
Since the machine works through creating pressure above the water reservoir (bottle), if this part is cracked the whole thing becomes unfunctional. Thankfully the interface is a separate part and the machine is pretty easy to take apart, so I whipped up a replacement part in fusion 360 that replaces the part on my machine that is cracked.
Additionally, my part has a different thread design that should prevent overtightening!
If you want to use this part, just unscrew the machine to open it up, disconnect the hosts, plop this part in, reconnect and it should all work! Make sure to attach all the screws before screwing in the bottle, this new
I recommend taking some reference photos before disassembly, but up to you :P
Printed with Ender 3 V2 w/ bl-touch, Klipper firmware, Esun PLA+. Using stock Optimal Speed config from prusaslicer, 150% speed.
Recommended print settings:
Print it with the flat (top side) side facing down, with "snug" support on build plate only. Turn avoid bridging areas OFF.
Make sure your print is water-tight! Other than that, this should be a nice easy 1hr print :)