Adapter for Steering wheel controller 58mm to 70mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Made this adapter to swap out the steering wheel on a Thrustmaster Sparco R383 to a standard wheel.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 74
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution
Made this for my brothers racing sim rig. He was using the Thrustmaster Sparco R383, but wanted to replace the steering wheel, but it didn't fit the hole pattern of the original controller.
This adapter requires:
- 6xM6 nuts to add to the top part
(The one connected to the new steering wheel, these need to be added mid print so remember to add a pause)
- 6xM6 bolts for the nuts above
- 6x blind rivet nut with a radius of 6.9mm (for the center hole)
- 6x bolts for the blind rivet nuts (these need to be long to reach all the way in from the outer circle)
- 6x bolts with cone heads (we used the ones that came with the original wheel)