Thermaltake V21 Fan holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted to use only 1 fan for my mATX server build to be as quiet as possible.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 67
- Wydruki
- 0
- Wyświetlenia
- 1326
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
I wanted to use only 1 fan for my mATX server build to be as quiet as possible. Therefore I wanted to mount the original 200mm fan above the motherboard in addition with the Alpine AM4 Passive cooler (https://www.arctic.ac/us\_en/alpine-am4-passive.html). Also, when doing maintenance, I wanted to be able to remove the fan as quick as possible. With this holder you can simply remove the two rails and you have full access to your system.
You can reuse the pre-installed Thermaltake fan that came with the case. You only need 6 M4 screws with 4 standard 3cm fan screws.
When printing, do not forget to mirror one holder!!
Print instructions
Category: Computer Print Settings
Printer Brand: Prusa
Printer: I3 MK3S
Rafts: Yes
Supports: No
Resolution: 0.2
Infill: 20%
Notes:
I suggest PETG, however PLA should also work just fine.