4 inch corrugated pipe cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
4 inch corrugated pipe cover (atrium)
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 75
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Share Alike
I needed two 4 inch and one 6 inch corrugated drain pipe grates but the 4 inch ones at the box stores were a combo 3 & 4 inch unit with a hole opening of only 2 3/4 inches (not much use for water flow) and both need a outer ring in my opinion.
Remix and mashup of 2 Thingiverse models I liked. I used the drain grate model as a base idea. I reworked the slots so it is print in place w/o supports, took the inner prongs from the pipe grate and widened them in the arch making them stronger, and added a outer ring to prevent dirt/gavel from entering the pipe from the sides. Also, if needed, you can drill a pilot hole and put a screw (or 2) through it into the tube to hold it in place for vertical use.
25% infill with 3 walls recommended for strength.