Ring Curtain Bracket for 3/4" EMT Conduit
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple design to use 3/4" EMT Conduit as a rigid curtain rod.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 52
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution
We have a patio door where we have sheer curtains. The wife wanted to block some of the light and so she got a 50% blackout ring curtain. The idea was to hang the blackout curtain behind the sheer curtains where she could draw it or move it aside for more or less light or privacy.
The design uses 3/4" EMT Conduit because of its rigidity so no need for a center bracket. Since I needed the bracket to contain the ring curtain behind the sheer curtains, the main bracket was a bit shallow (too close to the wall) so I designed a block to bring it out which worked perfectly. I also created another bracket that already is deeper than the original. (same size as the original with the block).
To print a set, simply bring one in and clone it, then mirror the Y-Axis of one of the brackets to have a pair.
I printed mine in PETG with 100% infill as I knew there would be a lot of pulling on the curtains to draw move the curtain around. I printed the block with 15% Gyroid infill, also in PETG.