1 / 2
Mainspring winder case/Caja del enrollador del muelle principal — zdjęcie 1
1 / 2

Mainspring winder case/Caja del enrollador del muelle principal

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Mainspring winder case of standard size for 12 units

Ocena
0 / 5
Polubienia
0
Pobrania
8
Wydruki
0
Wyświetlenia
84
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

The mainspring winder case uses a 14x8.5x3.5 cm plastic box, which I got from Temu. The winders are the set listed as package A, purchased from Temu or AliExpress, containing 10 units. I also added two more, the NH35 and AP3120, to complete the 12 slots. Additionally, I got the long, bidirectional extension.

I used PETG; I don't recommend using PLA because it reacts with nearby metal when it decomposes. ABS or ASA are ideal.

Print Settings 

Supports: It depends of the part 

Resolution: 0,20mm

Infill: 10% 

Filament material: PETG 

Nozzle: 0.4mm

 

Tagi