1 / 2
Mainspring winder case/Caja del enrollador del muelle principal
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mainspring winder case of standard size for 12 units
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 8
- Makes
- 0
- Views
- 84
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The mainspring winder case uses a 14x8.5x3.5 cm plastic box, which I got from Temu. The winders are the set listed as package A, purchased from Temu or AliExpress, containing 10 units. I also added two more, the NH35 and AP3120, to complete the 12 slots. Additionally, I got the long, bidirectional extension.
I used PETG; I don't recommend using PLA because it reacts with nearby metal when it decomposes. ABS or ASA are ideal.
Print Settings
Supports: It depends of the part
Resolution: 0,20mm
Infill: 10%
Filament material: PETG
Nozzle: 0.4mm