Counting matching models…
Handle fits B&K Mueller hose bibb valves with a 7mm x 5mm rectangular shaft. Might fit other brands. Including the fusion 360 file if there is a need to adjust the dimensions to fit your application. Requires supports and fill of at least…
The mainspring winder case uses a 14x8.5x3.5 cm plastic box, which I got from Temu. The winders are the set listed as package A, purchased from Temu or AliExpress, containing 10 units. I also added two more, the NH35 and AP3120, to…
mini pistola se imprime bien antes de usarlo hay que desbloquear el mecanismo facil de imprimir
Reemplazo para la pieza que sujeta el muelle de un recogehojas. Esta parte dónde se incorpora el muelle es la que presio
Coupler for Müeller MU-HB-02 Ultra-Stick Hand Blender Notes: Does not mate with original coupler, print and replace both parts Tested in PLA with: Inner/Outer/Inner 0.4mm nozzle 0.12mm layer height 40% infill Should probably be printed in…
Created this topo using the tool at - https://touchterrain.geol.iastate.edu/main It's a small print, but the resolution is good enough that it should scale up with no problem.
Busch Mueller Button Case for Canyon H17 This mount allows the light control button to be attached to the Canyon H17. The screw holes are designed to fit the included screws. There's also a bit of space so that insulating tape can be…
This bit holder for multiboard is a remix from @ mmuellerphoto which I have modified to use a bolt locked and a flushed snap. You can used this moderate weight-bearing flush snap and a Locking T-Bolt from Multiboard parts.
I love this food chopper. Other than the green grid cleaner, the tines on it are broken. I designed up a larger and more sturdy model. There are several models of the chopper. This is the exact one that I have.…
Handle fits B&K Mueller hose bibb valves with a 7mm x 5mm rectangular shaft. Might fit other brands. Including the fusion 360 file if there is a need to adjust the dimensions to fit your application. Requires supports and fill of at least…
The mainspring winder case uses a 14x8.5x3.5 cm plastic box, which I got from Temu. The winders are the set listed as package A, purchased from Temu or AliExpress, containing 10 units. I also added two more, the NH35 and AP3120, to…
I did not find a nice mount for aero bars for a Busch & Mueller IQ-X, so I made one. The light is held by an M6 screw + a square nut, though a normal nut probably fits as well. It is adjustable in angle by about 90°. The wedge is meant to…
Busch + Mueller make a load of high quality bicycle lights, in my opinion the best out there for dynamo-driven lights. They cost a ton of money, but if your life depends on it (as mine does as an all-year commuter), the best light is…
a mount for the Busch & Müller IX RED bike tail light built to last with 72° and 76° angled versions diameter 34,5mm designed for heat sunk threaded brass inserts M4x8 use with screws M4x20 and standard washers best not printed in PLA,…
I designed this backlight mount for the Busch & Mueller Line Small. It can be attached to the bike rack screws on the back of my cargo bike. This ist the "NEW" version with embedded Nuts and overall a little bit thicker. Print…
Adaptador para poder atornillar, en mi caso para la nivelación de la cama... Hotbed regulation
Impresa en PLA, muy fácil. Se imprime de una vez. Para imprimir poner las pieza apoyando la parte del muelle en el plano horizontal.
These adapter was neccesary because the local shop only had a 30mm mounting for a light which fits un the Suntour Fork. With this little thing you are able to use the longer mount delivered with the Busch&Müller Lumotec light. pinted on…
This is a replacement part for the Mueller Ultra-Stick Hand Blender (SKU MLR010001N) Union of motor to head piece. This is the piece of plastic that goes from the motor section to the immersion blender side. I modeled it off the broken…
This is a replacement part for the Mueller Ultra-Stick Hand Blender (SKU MLR010001N) motor housing. This is the piece that connects to the main motor/drive head and not the separate “union” attachment pieces. **If you need the separate…
Customized version of http://www.thingiverse.com/thing:1878672 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=1878672 Instructions Using the following options: spring = 9 screw = 3.2 reel_price = 15 wall…
I could not find a bracket for the U2C that would fit one of the Din Rail mounts published by mmuellerphoto.
