1 / 14
FDMDuo Bluetooth Loudspeaker by Deposition Sound LLC — zdjęcie 1
1 / 14

FDMDuo Bluetooth Loudspeaker by Deposition Sound LLC

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

3D Printed Bluetooth & Passive Loudspeaker

Ocena
5 / 5
Polubienia
28
Pobrania
97
Wydruki
3
Wyświetlenia
440
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Audio
Licencja
Creative Commons — Attribution — Noncommercial

Built on the foundation of the FDM4, the FDMDuos deliver stronger low-end performance with enhanced output below 100 Hz. If you like a little junk in the trunk, these bad boys are for you. They still carry the top end sparkle of the FDM4s, but with a bit more directionality. So, point them to the audience and brace for impact.

We've created split planes to facilitate printing on smaller machines and increase color customization options. Additionally, the cabinet is the stiffest design (per kg of filament) we've ever concocted. There's no flex here. Crank it to 11 and get ready party.

Available in Bluetooth, Stereo, and Center Channel

As usual, everything prints without supports. Carefully inspect the attached 3MF for orientation.

Here are some basic (minimum) print settings:

  • Cabinets: 3 walls with a 0.4mm nozzle, 2 walls with a 0.6mm nozzle, 20% infill, 4 top/bottom layers

  • Front Baffle & Wave Guide: 5 walls with a 0.4mm nozzle, 4 walls with a 0.6mm nozzle, 20% infill, 6 top/bottom layers

  • Beauty Rings: 100 walls, no infill

  • Rear Baffle: 5 walls with a 0.4mm nozzle, 4 walls with a 0.6mm nozzle, 20% infill, 6 top/bottom layers

  • All other parts 100 walls, no infill

We like concentric infill for top/bottom layers primarily for the aesthetics. Use Gyroid infill on all other parts that are not solid.

Enjoy!

Tagi