1 / 14
FDMDuo Bluetooth Loudspeaker by Deposition Sound LLC — image 1
1 / 14

FDMDuo Bluetooth Loudspeaker by Deposition Sound LLC

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

3D Printed Bluetooth & Passive Loudspeaker

Rating
5 / 5
Likes
28
Downloads
96
Makes
3
Views
435
Reviews
2

Updated at source:

Model information

Category
Audio
License
Creative Commons — Attribution — Noncommercial

Built on the foundation of the FDM4, the FDMDuos deliver stronger low-end performance with enhanced output below 100 Hz. If you like a little junk in the trunk, these bad boys are for you. They still carry the top end sparkle of the FDM4s, but with a bit more directionality. So, point them to the audience and brace for impact.

We've created split planes to facilitate printing on smaller machines and increase color customization options. Additionally, the cabinet is the stiffest design (per kg of filament) we've ever concocted. There's no flex here. Crank it to 11 and get ready party.

Available in Bluetooth, Stereo, and Center Channel

As usual, everything prints without supports. Carefully inspect the attached 3MF for orientation.

Here are some basic (minimum) print settings:

  • Cabinets: 3 walls with a 0.4mm nozzle, 2 walls with a 0.6mm nozzle, 20% infill, 4 top/bottom layers

  • Front Baffle & Wave Guide: 5 walls with a 0.4mm nozzle, 4 walls with a 0.6mm nozzle, 20% infill, 6 top/bottom layers

  • Beauty Rings: 100 walls, no infill

  • Rear Baffle: 5 walls with a 0.4mm nozzle, 4 walls with a 0.6mm nozzle, 20% infill, 6 top/bottom layers

  • All other parts 100 walls, no infill

We like concentric infill for top/bottom layers primarily for the aesthetics. Use Gyroid infill on all other parts that are not solid.

Enjoy!

Tags