290 models
I've been frustrated for a long time by the poor quality of the simple phone speaker … so I designed a phone stand that amplifies (and maybe even improves) the sound of my phone … Since there is now a contest going on for Phone Stands … I…
Print approx. €8.69–€10.62 excl. taxPreliminary estimate for one variant
Hello there! I was looking for a plug and play speaker replacement for my BMW E46 Compact (CAUTION! This model has bigger front door speakers than all other E46 - this adapter is only fitting for Compact!) and wanted better sound quality…
Print approx. €8.66–€10.59 excl. taxPreliminary estimate for one variant
I designed this model in order to adapt the original front speakers from an BMW E34 that are 130mm (144mm between screws) and fit bigger 165mm speakers from Hertz I will use inserts in order to fix the 165mm speakers but Hex Bolt can also…
Print approx. €2.36–€2.88 excl. taxPreliminary estimate for one variant
Hello there! As I was upgrading my manufacturer sound system in my BMW E46 I noticed the original speaker covers killed a lot of the sound. After some research speaker covers with honeycomb design turned out as a good choice, as its…
Print approx. €1.64–€2.00 excl. taxPreliminary estimate for one variant
Took the grille insert that @mbarvo made and turned it into two parts to make it easy to change the pattern of the grille to the infill select. You'll want to go to the original…
Print approx. €1.71–€2.09 excl. taxPreliminary estimate for one variant
This support allows the speaker to rotate about 45° to the right or left. I designed it specifically for my HW-Q930D, but it should also be compatible with: Q930B Q930C Q930D Q990B Q990C Q990D Q995B Q995C Q995D Possibly others as well.…
Print approx. €1.35–€1.66 excl. taxPreliminary estimate for one variant
Stan for DIY speakers. You can order the kit to build such speakers here: https://www.soundimports.eu/en/300-7148.html
Print approx. €5.20–€6.35 excl. taxPreliminary estimate for one variant
I recently upgraded the speakers in my Toyota RAV4 Hybrid (non-JBL version) to Infinity speakers. Since the upgrade isn't visible, I decided to showcase it by 3D printing the Infinity logo and adding it to the speaker grilles. Filament…
Print approx. €0.09–€0.12 excl. taxPreliminary estimate for one variant
Lost the mounts for rear onn surround sound speakers
Print approx. €12.61–€15.42 excl. taxPreliminary estimate for one variant
Hey everyone! I'm super happy about the reaction to my recent YouTube video where I designed and built this pair of speakers. A number of people asked for the files to print their own, which is awesome – so here they are! Need help on the…
The speaker enclosure has a volume of 4.5 liters and is tuned to 60 Hz. It features a triangular port design, eliminating the need for support structures during printing. Crossover: I designed my own crossover based on online…
The "Geos" are edgy, literally 😎 We've combined the sugary sweetness of the FDM5 top-end with an accurate and punchy mid-section and bottom end. If you're into critical listening, or even mixing and mastering, the FDMGeos are for you! The…
This is an adapter to install a 6.5" aftermarket speaker into multiple models of GM vehicles. Included are two models. One with 8 X 2.75mm holes in a 156mm circle, the other without any holes so you can drill your own. Print Settings…
A very long Introduction … I present to you my suggestion for vibration damping for any 3D printer. There are many systems that try, and indeed reduce vibrations, but not all systems are efficient, or even applicable to all contexts. Many…
Hey makers! 🛠 Tired of your Pebble 2.0 Desktop Speakers stealing your desk space? Same. That's why I whipped up these rad 3D-printed mounts – perfect for slapping those speakers right onto the back of your monitors. Features: Space Saver:…
This is an adapter for a 2015-2020 F-150 front and rear door speakers to go from the OEM size to 6.5" drivers. Recommended print in PETG. I printed mine at 235c/70c @60mm/s Predrilled holes are lined up for Rockford Fosgate speakers, but…
This is our 3rd speaker design to date. We went way off-script with this loudspeaker, hoping to attract those with smaller build volumes and a desire for deep bass and excellent off-axis response. They pack the party animal of the FDM5's…
Developed in the summer of 2023, these 3D printed bookshelf speakers are our first attempt at properly meshing 3D printing and audio. We believe that we hit the mark! FDM5 Loudspeakers throw out an impressively wide soundstage and boast a…
Funktion one models straight from their website. The reason why most other models dont work is because they turned the cad 3d file into a shell before scaling it down or their shells are too small. all speakers have been updated with the…
Here is my latest speaker system, it's a set of hi-fi grade speakers designed to be printable on small-bed 3D printers, including the Prusa Mini. It's a sub-woofer and satellite system usable as a 2.1 stereo system, or a home cinema…
Speaker adapter for 07-13 GMC / Chevy's front door speakers. This is a speaker mount for 6.5" speakers. The design uses (4) 4mm heat press inserts. The stock speaker and mount is on the left, the new mount is on the right.
This is a speaker grill for trust leto speakers which i built into a phoniebox
The advantage of this over the flat diffuser is it makes the stack thinner for fitting many types of speakers on the threaded posts. If you want 5.25 speakers with a pro kit, this also gives you the mount, and the extra diffuser in front…
Speaker Stand for Monitor Speakers The Problem: if Monitor Speakers sit flat on a tabletop, the sound is not directed towards the ears. My Solution: incline the speakers upwards so that they are pointing straight towards the head of the…
This 3D-printable speaker adapter was designed to fit aftermarket speakers in a 2012 Vauxhall/Opel Vivaro (Vivaro A) camper conversion. I created it for a family member after being unable to source a suitable adapter in time for a planned…
Bass speakers modelscale 1:20 Work in progress
Greetings, A few months ago I began designing, building, and testing 3d printed speakers using the SB Acoustics SB15 and SB26 aluminum drivers. The tweeter on all three designs use the Somossonus (AKA Augerpro) waveguides, but with some…
These little bookshelf speakers make use of the popular Dayton Audio PS95 Point Source driver, with a back volume of about 2.5L and port tuned to ~70Hz. The model is designed to print with the back on the bed and the driver/port openings…
I'm a happy owner of the Drop BMR1 Nearfield desktop speakers (even though it is a bit of a Kickstarter-like experience and not everyone is happy - but then, it's nearly impossible to make everyone happy anyway). They did have an optional…
This is a remix of guppyk2 speakers. This remix includes all files needed to print a 2.1 setup with AMP, Speakers, and Subwoofer. I designed these files specifically to fit the 4-inch Aiyima Speakers and 5.25-inch Aiyima Woofers in the…
Box for creating an acoustic speaker from two speakers from a TV In project i use 2 speakers with size: 88x36x40mm It is necessary to optimize the attachment of the cover to the body (I used self-tapping screws). Current solution not…
KALIN - audio speakers on popular DaytonAudio PS95-8 driver and optional with led light.The idea was to use a cheap and good loudspeaker. I chose the known and liked, popular in DIY projects driver…
A simple model that allows mounting of Vizio surround sound speakers to the wall at an angle. Mimics the included mount, but at a 45° offset. I found a couple of models online that were for this application, but they did not fit. So I…
I scanned the speakers of the Logitech Z906 with the Creality Ferret pro. You can use these models for your designs. They are very accurate (< 0.2 mm).
Due to lack os space I needed to mount my speakers above the monitor on the wall. To lazy to get stuff at a home improvement store I designed one and printed it. Of cause they can be used for other things. height 90, depth 180, width 150…
Hi, after my son broken original covers for my best PC speakers Creative Gigaworks T20 Series II, I decided to create my own cover version. Please leave your like if you appreciate my work to motivate me for more. Even better… show your…
MK Kit 3D-Printed Bookshelf Speaker Enclosures The MK Kit 3D-printed enclosure files give builders a clean, printable cabinet option for the Parts Express MK Kit Pair - Components Only package . This design was created specifically for…
Downward-facing stand for the Edifier R1280DB bookshelf speakers. The front bracket just fits between the speaker housing and the cover. — I would be very happy if you have as much fun with the things as I do. — If you like :-) Thank you…
I used this solution to recover an old speaker that I would have otherwise thrown away. I bought this radio with Bluetooth receiver and USB / mSD player, an amplifier and a power supply on Amazon for a few euros and everything is great.…
...to atach speakers straight to the wall.
This is a volume knob extension for Audioengine A2+ Speakers. It may fit other Audioengine speakers. I made it to help me control the volume without having to reach all the way around the back. This works well for my home office setup.…
This is a corner bracket for mounting a Satellite Speaker to a wall. Print in ABS, support free. To use this you'll need one M3 Bolt (about 16 - 20 mm), an M3 nut (not nylock), two wall plugs and two screws to match. After fitting on the…
I created this model that perfectly fits the bottom profile of the Neumi BS5 Bookshelf Speaker. It is angled upwards at 13 degrees for a great on-axis nearfield listening experience. These fit the Neumi speaker profile best when you use…
I created these backers as I had been damaging my kicker speakers about once per season and I have a theory that air pressures could've been adding to the cause of this and I also wanted a way to quickly change damaged speakers without…
A simple stand design I made for my Klipsch active speakers to achieve the optimal listening height. Of course, it’s also compatible with any other speakers. Width: 16 cm / Depth: 23 cm / Height: 25 cm Top and bottom plates are identical…
I was looking for a place to put my steel darts for my darts setup. I have the darts board set up on a speaker holder with a special adapter. So I designed a holder. Below you can find three versions: Dart_Holder_Speakerholder_V1: A…
The grille plastic I bought didn't fit the speaker holes, and I didn't want to grind or break anything, so I printed those that fit. check video Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2…
I wanted to hang my Satellite Surround Speakers in my Workshop. But I wanted them horizontal and mostly centre pointed facing in the room. The original feet did only provide as standing or vertical. So I designed some new feet with the…
Revisando dos pares de audifonos dañados, encontré que ambos tenian bocinas con un diametro de 40 mm lo que me lleva a suponer que muchos audifonos de este tipo tengan bocinas de igual medida. Así que decidí diseñar ésta estructura nueva,…
This small hanger can get your Logitech Z200's off your desk and mounted up on the wall! I made the holes for #8 screws, and I put 2 screw holes in these hangers, but you'd be perfectly fine using just 1 up top The L & R hangers are…
this is a model for a floor standing speakers. uses a t-line for more performance. uses TWO 8 inch sub woofers in series (isobaric) a 4 inch mid driver and an 1.5 inch tweeter. I personnally repupossed a pair of broken Marrantz speakers,…
I really like my Edifier desktop speakers, but I want to make more room on my desk, and the angled shape of the speakers means anything I rest on top of it slides off. I designed a simple shelf with a 10 degree angle, that sits right on…
This is a desktop stand for KEF LSX / LSXII speaker. Made based on the original design, prepared for 3D printing with addition of my logo and a more customized version. Separated parts are made to print the top and bottom pads separately…
Description: This set includes two rear speaker supports for Samsung soundbars. The Avatron Style is designed specifically for the Samsung Q930, matching the original Avatron support (see reference link). The Universal Pole Style is a…
Included are two models, an angled model and a rounded model. Printed in PLA.
This remix is based on the original model from @BillTech_212444 , modified specifically to fit my M-AUDIO BX4 speakers. The dimensions and details have been adjusted to ensure a perfect fit with these monitors while keeping the overall…
I designed these 3D printed speakers around the Aiyima 2" driver which can be found on Aliexpress. Helpfully a guy on Youtube ( at about 40seconds) shared the Thiele Small parameters for them and using those I designed the enclosure…
These are small computer speakers that are a modification of an existing “boombox” design. I used the design by Tom Zarbo found here https://www.youtube.com/watch?v=zCrpgpnYlOo and made them into separate speakers. I used the same box…
sound bar design I did up to make use out of an old pair of pc speakers that no longer worked I added a picture of the set of speakers i used but you could substitute your own speakers and amplifier board from amazon. there is even plenty…
I created this model as a cool project for a friend. I got a lot of interest in them as people saw the set up. Designed to use the Visaton BF37-8 1.5" Full range driver. It also uses the speaker terminal cup from Parts Express (260-300).…
Very simple speakerstand for small desktop speakers. Holes to route the speakercable through the stand. Printed without support in PLA. Freecad file supplied, but scaling directly in the slicer should probably be fine, just beware of the…
Field-tested replacement handles that have been banged up on tour with no problems. Solidworks files included. - Handle_replica_DFM (recommended) - mimics the look and shape of the original handle, with a minor modification to make it…
My Logitech X-530 Surround Sound System originally has some kind of meshed Fabric as protective covering up the front. Unfortunately after some time it has some holes and doesn’t look nice anymore. So I decided to print me some new covers…
I needed new spikes, measured an existing spike a made a model very similar. The hat model was as I planned to use a wooden rod for strength, but to my surprise a 2 perimeter PLA version "just works" There is a FreeCad file of you want to…
This is a simple back plate for replacing the wire terminals on Technics 12 inch floor speakers with banana plug sockets. You'll need this set of banana plug terminals for this project:…
Replacement speaker grill posts for realistic minimus 7W speakers. These are a little wider to avoid rattles.
Kupiłem adaptery, które miały pasować zarówno na przód, jak i na tył samochodu, ale okazało się, że pasują tylko do przodu. Dlatego tylne adaptery zaprojektowałem samodzielnie i wydrukowałem. Z przodu uważam, że adaptery będą pasować bez…
What LittleJet! are?! Hello makers, here's Davide, and today I would like to share with you all, my new designs based on this project: https://hackaday.io/project/168919-3d-printed-bluetooth-speakers-littlejet You can read about it here:…
This adjustable speaker mount is designed for light to medium satellite speakers and consists of four separate flat-printable parts to maximize strength along the print layers. The joints are connected using pins with 0.2 mm tolerance ,…
Here is a remote holder for an Argon Audio remote. I am assuming the remotes are quite generic for their line-up of active speakers. Mine came with my Argon Audio FORTE A5. The remote is not very often used, but I tend to loose it on my…
10cm PC speakers My 8 year old son asked me to build him something from old 10cm speakers we salvaged from an old condemned renault twingo our local fire brigade used for rescue exercise. Since son's computer only has very low quality…
Speaker mount for the Klipsch Pro Media 2.1 also works with other small satellite with a M5 mouting thread on the bottom. Fit is a bit tight on some printers, may want to scale down slightly Printed in PETG @ 0.20 layer height. Print with…
Simple wall mount for Samsung HW-Q930C Soundbar satellite speakers.
If you have a lot of M3 hardware sitting around and want to put some Kicker CSC5 speakers in your Stern pinball machine, then these plates will work for you (assuming you don't want LEDs). See the original for installation instructions.
This has a larger cut out hole and screw hole locations for the BNB and Galforce F1 6.6 speakers
I wanted to create a very loud speaker arrangement using four 3.5" Motran piezoelectric tweeters. This printed waveguide design boosts the sound directivity significantly. The results are super loud & annoying soundwaves, much like the…
Project Overview This project features a custom-designed PCB , a connector arm that links Akari’s Facial Interface to the AVP Solo Knit Band or AVP Dual Knit Band and a cable guide for clean cable management on the AVP Band. Connector Arm…
Electro-Voice MT-4 I recently discovered on Youtube a Metallica concert in Moscow in 1991 . I was amazed by the mass of the crowd . I love listening to Metallica and I am a bit of an audiophile, so I was interested in how they sounded…
Commissioned work for the Karlsruhe University of Music (HfM). All screw holes are designed for M3x5,7 threaded inserts (I used CNCKitchen's inserts). Printed using Prusament PETG.
I was surprised by how overpriced and ugly the desktop speaker stands were online, so I decided to do something about it. I made a super affordable stand using 3D printing and concrete – in a way tha I haven’t seen anyone else do before.…
Speaker holders for a cheap piezo speaker which is about 50 mm in diameter and has screw posts to mount it. I made these for some lab work but they could still be useful for other people. Including the fusion360 files to make it easily…
Little filament saving model to mount small speakers or other things to the wall. I have used a little screw to attach the speaker. Mounted my Heco vogue Speakers with this. This is long enough to still be able to rotate the speaker 180…
I needed to move my speakers off of my smaller standing desk and couldn't find a good solution. So, I ran through a few iterations and came up with this solution. its sized specifically to snap onto the bottom of a Logitech - Z207…
Replacement backing plate where the RCA jacks connect to the speakers. The wood broke so I created this. See pics.
I used this spacer with 4" Flipper Fidelity speakers to raise them just a bit to allow the speaker grill to fit better and be flush.
This stand is designed to elevate Studio Monitor, to fit Edifier MR4 Studio Monitors. Plate size is 140mm x 160mm and are 200mm tall. The stand column was designed to fit around 25 mm tube, for strength and positioning of the 2 parts. To…
For SVEN MA230 The grille serves two functions: it protects the speaker cones from mechanical damage and dust, and also serves a decorative purpose speakers. PLA/PETG Print time ~5h ~190 g Nozzle: 0.4 mm Layer Height: 0.2 mm Fill Line…
Want to make your Club V series speakers look decent again, but found out a replacement badge isn't sold anywhere? Print your own faithful reproduction! Category: Electronics
This is a remixed version of the Bose 161 speaker desk mount. I've made two key modifications to improve its functionality: 1. **Increased Stability:** The base has been elongated to provide a larger footprint, significantly improving the…
This is a version of the Sputnik 17 speaker using thinner plywood and larger (4 inch) speakers. What we said of the first version still stands: Dodecahedron loudspeakers radiate sound in all directions. They also look really cool. This…
Enlarged the square a bit and added recesses for the mounting pins on the back of my Logitech Z340 left and right speakers. Should also fit the Z640 speakers. Printed in PETG with 3 walls and 15% infill. Rest of the parts are from…
This was part of a weekend project to turn a nearly destroyed PA cab into a cat bed. See my other models for the rest of the plastic work. This horn plate/cover was designed after the SkyTec SL12 PA speaker, but should work on most of…
Hey, this was my project from few years ago when I was getting into 3D modeling. I was looking for a project to learn basics. I redesigned speakers for an old and broken home cinama studio. The goal wasnt to make it work as before, the…
I created a bassport with waveguide for ported speakers.This addition makes it possible to place speakers against the wall or give better spreading of the bass for down ported speakers. The cone acts as a waveguide to deflect the bass…
This handle was designed after the SkyTec SL12 PA speaker, but should work on most of those cheap cabs. This was part of a weekend project to turn a nearly destroyed PA cab into a cat bed. See my other models for the rest of the plastic…
Print two of these per speaker and stop wasting money on speakerstands which are too expensive, just get the Stav 24 and convert them to accept 7xx bookshelf speakers. I DO not recommend printing in PLA because it will degrade in the sun…
Compact 4" coaxial 3D printed active studio monitors with DSP (only digital input, dsp/amp board limitation). Monitors are sealed design for best transient speed and mid-range monitoring with target Qtc 0.50 (Critically Damped) and…
Hinges to adapt a Rigid Headstrap made for the Oculus Quest 1 you can find here : https://www.aliexpress.com/item/1005001562458200.html With headphones you can slide on it before installing to get sound. You can use those kind of drivers…
This is not just a standard print – it is the ultimate challenge for your 3D printer and a dream come true for audiophiles! This project features massive floorstanding loudspeakers, with a design heavily inspired by the legendary Focal…
I created the cooler because I had the feeling that the passive cooling was not sufficient under load. I use 2 x 40mm 5
